When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A while ago i installed LED bulbs in my tailgate’s with hyperflash hraness and every thing was flashing as they should. Tonight I installed LED front turn signal bulbs left and right signal flashing as they should, but I get a hyperflash when I use the hazard lights am I missing something here?
That, unfortunately, is one of the "hazards" 😁 of using LED bulbs. Mine does it too but I never use them anyway. So it doesn't bother me to much. I've never looked into fixing it either.
Hyperflash harness only does the turn signals. The hazards and switched onto the flasher all internally inside the switch so it'd require circuit board modifications to fix.
Hyperflash harness only does the turn signals. The hazards and switched onto the flasher all internally inside the switch so it'd require circuit board modifications to fix.
I think I got the fix for it is to use Morimoto bulbs they come with built in resistors they are anti hyperflash. I am going to order two sets for the taillights and report back.
Turn signals and hazard use two different 'flashers'. DOT safety regulation from the late 1960's. LED Hyperflash kit bypasses the OEM 'flasher' for the turn signals only.
I installed LEDs front switchbacks and regular in rear. At first lots of hyper flash. I came on forum and I learned if I four way flashed for a minute and shut off bikes, light bulbs would be ok. Mine is 01 Ultra Classic
disreguard wrong forum lol
My hyperflash harness awaiting install has a removable flasher on it. When a motorcycle had hyperflash I bought a couple adjustable flashers that can be set to whatever rate you want. Haven't tried them together yet but I assume they'd work. https://www.ebay.com/sch/i.html?_fro...c&LH_PrefLoc=3