Z06 PCV System
Thread Starter
Burning Brakes
Joined: Feb 2002
Posts: 1,154
Likes: 25
From: Jasper GA
Z06 PCV System
The final solution to my oil in the intake tract problem appears to be converting to the late Z06-style PCV setup. Two questions: what parts do I need, and will the Z06 valley cover fit on my C5R block ( I realize that it won't work on the LS1 block without machining).
Pro
Joined: Nov 1999
Posts: 596
Likes: 0
From: Red Raider
Re: Z06 PCV System (marco383)
The final solution to my oil in the intake tract problem appears to be converting to the late Z06-style PCV setup. Two questions: what parts do I need, and will the Z06 valley cover fit on my C5R block ( I realize that it won't work on the LS1 block without machining).
2) The older LS1 blocks had a extra casting area which gets in the way of that LS6 oil catcher, which is underneath the intake valley cover. We used a dremel and hack saw to cut the area. It wasn't too hard.
I can send you some pictures from my install on my '98 LS1 block.
[Modified by Teddy98Z28M6, 8:33 PM 2/6/2003]
