Blackwing install question
Thread Starter
Racer
Joined: May 2003
Posts: 484
Likes: 0
From: L. I. NY
Blackwing install question
Just received Blackwing air cleaner. :thumbs: I have a question though. What goes into the hole next to the built in gauge that tells you when the filter needs cleaning? I have a 2000 Vette. Also, does the filter mount with the gauge on the driver side or passenger side? I also think I am going to install the filter at the same time I change my battery. This way the computer will wake back up and be able to set itself according to the new air flow . Sound like a good idea? :confused:
Pro
Joined: Jun 2002
Posts: 687
Likes: 0
From: Wichita Falls Tx
Re: Blackwing install question (LS7)
Your air pump(egr stuff) goes in the hole.Should be a rubber hose and a groumet. If not then get a little filter from autozone. I know my 99 has it but I disconnected it when I put my headers on.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski