LG Production Headers!
Racer
Joined: Sep 2000
Posts: 487
Likes: 0
From: Below the Mason/Dixon Line Alabama
Re: LG Production Headers! (LG Motorsports)
Hi Lou;
Sure did!!! If I'm not on call, I plan to make it (you know, have to work to pay for the toys). I'm hoping to sort this out in the next couple of days. Can I sign up at the "last minute?"-I realize that's an inconvenience for you, but about the best I may be able to do.
Is Randy (and Jeremy) coming? It would be great to see the whole gang.
Regards to all!!!!!
Sure did!!! If I'm not on call, I plan to make it (you know, have to work to pay for the toys). I'm hoping to sort this out in the next couple of days. Can I sign up at the "last minute?"-I realize that's an inconvenience for you, but about the best I may be able to do.
Is Randy (and Jeremy) coming? It would be great to see the whole gang.
Regards to all!!!!!
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: LG Production Headers! (SPEED DOG)
Is Randy (and Jeremy) coming? It would be great to see the whole gang.
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
Re: LG Production Headers! (LG Motorsports)
With that exchange Murry Hill I really know where your from :lol: :lol:
Was there ever a hill there? Never seen even a small one on that island.
My GF said it was on "I Love Lucy too".
[Modified by John Shiels, 6:52 AM 7/16/2003]
Was there ever a hill there? Never seen even a small one on that island.
My GF said it was on "I Love Lucy too".
[Modified by John Shiels, 6:52 AM 7/16/2003]
Former Vendor
Joined: May 2003
Posts: 2,173
Likes: 2
From: Dallas Texas
Re: LG Production Headers! (John Shiels)
Eric, Late is ok. Just let me know. And bring Jim Willis with you.
John,
That "Murry hill number" was from a WABC radio add from a "Dennison Clothiers" add. it said, "Money talks, nobody walks at Dennison Clothiers".
It just stuck in my mind as a kid.
John, we still have room for you. What is life without adventure!
See you there.
LG
I see that my son Louis has been on my computer :lol: But this is me.
Lou Gigliotti LGM
[Modified by Louis @ LGM, 4:00 PM 7/16/2003]
John,
That "Murry hill number" was from a WABC radio add from a "Dennison Clothiers" add. it said, "Money talks, nobody walks at Dennison Clothiers".
It just stuck in my mind as a kid.
John, we still have room for you. What is life without adventure!
See you there.
LG
I see that my son Louis has been on my computer :lol: But this is me.
Lou Gigliotti LGM
[Modified by Louis @ LGM, 4:00 PM 7/16/2003]
Safety Car
Joined: Dec 2001
Posts: 4,295
Likes: 2
From: Indianapolis Indiana
Cruise-In III Veteran
Cruise-In IV Veteran
Re: LG Production Headers! (Louis @ LGM)
Lou, tell him to get back to me with that IM. :lol:
I was going to IM you with this, but I figure it'd be better to just post. What H/C of yours gives the best gains without any noticeable changes in idle and idle sound? What kind of gains should I expect with blackwing, ti exhaust, your upcoming LT headers, tuning, and whateve H/C you recommend? Dang, that may be tough to answer. :lol:
I was going to IM you with this, but I figure it'd be better to just post. What H/C of yours gives the best gains without any noticeable changes in idle and idle sound? What kind of gains should I expect with blackwing, ti exhaust, your upcoming LT headers, tuning, and whateve H/C you recommend? Dang, that may be tough to answer. :lol:
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 572
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: LG Production Headers! (BQuicksilver)
"B Quick" I will have Louis get back with you.
As for the delivery time, I just got off the phone with Borla, and they said 13 days. They want to complete them before the end of the month. Then it will take 4 days by truck to deliver 50 sets to our facility in Dallas. That puts the time frame at 17 days plus a couple of weekend days.
The pre production sale will end the day the headers arrive here in Dallas.
Thanks to all of you who have placed the pre production orders, even though you had to wait a while. It won't be long now.
The production headers will also be carried by West coast Corvettes and Ecklers so far, in addition to right here at LG Motorsports and your local tuners by request.
Thanks again
Lou Gigliotti LG Motorsports
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 572
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: LG Production Headers! (JB'S LT4)
Bolt right up....Zero welding.
Check out photo
Bolts to the heads, then there are 4 clamps, then bolts directly to the muffler flanges. 304 Stainless Steel full 3" system back to the mufflers.
Thanks
LG
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Advanced
Joined: Sep 2001
Posts: 71
Likes: 0
Re: LG Production Headers! (LG Motorsports)
Hi, I have the original Borla XR-1 (not the Stinger).
Will the tail section of the XR-1 bolt onto your pipes?
Also, how are all your sections connected togeter? Are they all welded @ Borla's factory?
Thanks
Will the tail section of the XR-1 bolt onto your pipes?
Also, how are all your sections connected togeter? Are they all welded @ Borla's factory?
Thanks
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 572
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: LG Production Headers! (TWC5)
Phil,
Borla said that they would complete the production run before the end of the month, so they could count them in their July accounting numbers. That means that we should see them by the first week in August.
TWC5,
The system will not bolt up to the early Borla XR1. We can make you an adapter for that, but the system is designed for the "cat back" mufflers.
The X pipe has clamps so it can be removed. The clamps are not shown in the photos, but the plan now is to have cats that fit in the X pipe area. We will supply 3 different levels of Cats. Catco/Carsounds, Random original style, and the new Random "Metal Matrix" which are the state of Catlytic art right now.
Catco/Carsounds are what other brands are now using. We want to offer the option of upgrading cats to meet the various customer needs.
Thanks,
Lou G
Melting Slicks
Joined: Apr 2001
Posts: 2,909
Likes: 1
From: Highland Village TX
Re: LG Production Headers! (kumar75150)
I might get a set. I just spent money on an x-pipe, cut all 4 cats and welded 2 custom pipes in place fo the pup cats. hate to waste all that hard work,,,LOL
Burning Brakes
Joined: Oct 2002
Posts: 822
Likes: 0
From: Bay Area CA
St. Jude Donor '08-'09-'10
Re: LG Production Headers! (LG Motorsports)
Will the cats void the use of an X-pipe?
- or will there be another X-pipe?
Do you have a drawing of what you expect the production headers to look like with cats?
(Can't see that there is space to add something where the X-pipe sits)
Thanks,
Nimo
:steering:
- or will there be another X-pipe?
Do you have a drawing of what you expect the production headers to look like with cats?
(Can't see that there is space to add something where the X-pipe sits)
Thanks,
Nimo
:steering:
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 572
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: LG Production Headers! (Nimo)
The Cats will be an addition to the X pipe. they only add 8" to the overall length. At first, we will have cats that will replace the entire X pipe, then the next production run will have room for the cats to be part of the x pipe.
We can do a custom cat set up for any of the first sets, but theywill have to be hand built.
Right now, theheaders are supposed to be completed by Borla next week, and shipped directly to LGM. We will then ship them out that day to all who have ordered.
Thanks to all who took advantage of the pre production pricing.
I will keep you posted.
Lou Gigliotti LGM
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
Re: LG Production Headers! (LG Motorsports)
If I had them on my car I'd trailer it upside down. Winter project for me when my account recovers. They do look and perform nice.
Le Mans Master
Joined: May 2000
Posts: 5,377
Likes: 14
From: Kansas City MO
Re: LG Production Headers! (LG Motorsports)
Right now, theheaders are supposed to be completed by Borla next week, and shipped directly to LGM. We will then ship them out that day to all who have ordered.
Thanks to all who took advantage of the pre production pricing.
Thanks to all who took advantage of the pre production pricing.
ken
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 572
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: LG Production Headers! (tattooed)
Ken,
Operators are standing by for your order :lol: At least they will be tomorrow. I am holding the price until the first production run hits Dallas. We have not hit the 50 mark yet. Although we have sold 83 G5X-2 cams :D
Give us a call and thanks
Lou G
Operators are standing by for your order :lol: At least they will be tomorrow. I am holding the price until the first production run hits Dallas. We have not hit the 50 mark yet. Although we have sold 83 G5X-2 cams :D
Give us a call and thanks
Lou G
