Harlan Shift Light Install?
Thread Starter
Instructor
Joined: Feb 2002
Posts: 213
Likes: 0
From: Waldorf MD
Harlan Shift Light Install?
Anyone tell me where I can find instructions to installing a Harlan Shift light in a Vette. I am familiar with its install in an F-body but have never messed with pulling stuff out of a Vette and would like sound instructions to use as a reference.
Also - what is the stock rev limiter set at? I need to setup the Harlan on stock limiter.
Thanks.
Will
Also - what is the stock rev limiter set at? I need to setup the Harlan on stock limiter.
Thanks.
Will
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Re: Harlan Shift Light Install? (Hannibal)
I went with the Raptor because it's smaller and much easier to program settings into. Flyin'Brian and I have both posted recently regarding shift light installation. You can do a search on "shift light", pick C5 Tech and archived threads and you'll get lots of information on wiring and mounting. I picked up the tach signal in the passenger footwell while Brian posted a thread about hooking it up under the driver's dash. That's the easiest method.
Here are a few of shots of my Raptor setup.
The hookup I used in the passenger footwell.
Here are a few of shots of my Raptor setup.
The hookup I used in the passenger footwell.
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Re: Harlan Shift Light Install? (Hannibal)
Yeah, just close your eyes and cut. :lolg:
Below is a link to Brian's most excellent post about his shift light install and finding the tach wire under the dash.
http://forums.corvetteforum.com/zerothread?id=619162
:cheers:
Below is a link to Brian's most excellent post about his shift light install and finding the tach wire under the dash.
http://forums.corvetteforum.com/zerothread?id=619162
:cheers:
