BBK Throtle Body Question
Drifting
Joined: May 2000
Posts: 1,413
Likes: 0
From: Wildwood MO
Re: BBK Throtle Body Question (SQEZN BI)
Yes, you need a gasket that goes between the adaptor plate and the throttle body. Making a new one is easy, but if you have the time, order one from BBK. You do not need a gasket between the intake manifold and the adaptor plate because there are o-rings on the intake side. I didn't need any spacers for the PS pump reservoir, the braket just needed to be bent out about 1/2" to make room for the TB.
[Modified by MTWallet, 12:24 AM 1/24/2004]
[Modified by MTWallet, 12:24 AM 1/24/2004]
Thread Starter
Intermediate
Joined: Feb 2002
Posts: 33
Likes: 0
From: Snellville Georgia
Re: BBK Throtle Body Question (MTWallet)
I just installed the throtle body. The gasket I was referring to was the one between the intake and the throtle body. The stock gasket worked fine and the car seems to be running better. It seems to have better accleration.
Thanks for all the input.
Thanks for all the input.
