need help replacing reverse syncro and fork
Thread Starter
Intermediate
Joined: Feb 2003
Posts: 31
Likes: 0
From: lexington ky
need help replacing reverse syncro and fork
i have a 2000 6-speed the trans pops out of reverse . i am told that it's probably the reverse syncro and or the shifting fork.c-tech says i can change these parts without completly removing trans.he has always been right with his info before,but i don't know what he means i need more instruction thanks in advance for any tips i am going out to remove rear gear i will check back a little later 
i am back again i have removed all rear suspension. i have not taken the transaxle away from trans. yet but it's ready.i am not sure if i should remove it or not.so i will wait to see if anyone has any ideas. i hope c-tech sees this post
i am back again i have removed all rear suspension. i have not taken the transaxle away from trans. yet but it's ready.i am not sure if i should remove it or not.so i will wait to see if anyone has any ideas. i hope c-tech sees this post
Last edited by happyhourvette; Aug 4, 2004 at 08:46 PM. Reason: need more help
Drifting
Joined: Aug 2002
Posts: 1,258
Likes: 0
From: South
Not sure if it has to be removed, but here is a link to the manual:
http://www.ttcautomotive.com/english...ice_Manual.pdf
http://www.ttcautomotive.com/english...ice_Manual.pdf
