Plug boot burning
Thread Starter
Team Owner
Joined: Dec 1999
Posts: 174,312
Likes: 1,218
From: Here
Pilot of Beer Force 1
Tampa Regional Coordinator
CI 4-5-6-7-8 Veteran
Organizer St. Jude Fundraiser
I believe in the Beer Fairy
Plug boot burning
Ok, WTF..I have had the TPIS LT on my car for over 2 years and have been using MSD wires never a problem..until last month...for some reason now the back plug wire on the driver side keeps coming in contact with the header and burning thru. Why all of a sudden??
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Has the boot expanded from heat (or possibly oil)? I have MSD and QTP headers and I know a couple of mine are real close. I have been watching them as well wondering if I should just bite the bullet and get some Kool Sox.
Melting Slicks
Joined: May 2003
Posts: 3,494
Likes: 0
From: McKinney Tx
Cruise-In V Veteran
St. Jude's Donor '05
this is typical of the number 7 plug wire. I have the FLP's and had the same thing happen. Not alot room between the plug boot and the header. You just have to watch and wait 
Racer
Joined: Aug 2000
Posts: 498
Likes: 3
From: huntington NY
Originally Posted by pewter99
Ok, WTF..I have had the TPIS LT on my car for over 2 years and have been using MSD wires never a problem..until last month...for some reason now the back plug wire on the driver side keeps coming in contact with the header and burning thru. Why all of a sudden??
Melting Slicks
Joined: Jan 2000
Posts: 3,029
Likes: 1
From: Wichita KS
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Originally Posted by rickvette
After burning two Magnecor number 7 wires against my TPIS LT's, I went back to the GM High Performance "Red" wires. Take a measurement (ohms) between any high performance LS1/LS6 wire set and the GM set. You'll be surprised! The longest wire in the set is under 9 inches long! I actually found the GM High Performance wires lower in overall resistence. The GM boots are really designed well for the LS1/LS6 motors.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Pro
Joined: Dec 2001
Posts: 634
Likes: 0
From: Oregon
Originally Posted by Pewtavert
Sounds like you need a set of Kool-Sox wire protectors.
Le Mans Master
Joined: Jun 2004
Posts: 7,156
Likes: 154
From: The Arid Sunny Desert
Originally Posted by 884fun
Where do you get these protectors? I'm going to replace my GM wires with another set of GM wires and I'd like to protect them from the extream heat our engines put out.
