"Beat the Heat" Header Sale @ MarylandSpeed - Kooks, SLP, SW and more!
06-30-2008, 01:25 PM
#1
Former Vendor
Thread Starter
"Beat the Heat" Header Sale @ MarylandSpeed - Kooks, SLP, SW and more!
The spring sale was a little long in the tooth, so we decided to expand it into a summer "Beat the Heat" Sale. We try and keep our prices as great as possible all the time, so this sale just highlights some of those savings.
With everyone getting their economic stimulus checks, it has been a busy spring, and that is continuing into the summer! We are excited to bring you the best headers out there for the Corvette at the best prices! We are also continuing our free coating special for Kooks!
In addition, as many of you know..a tune is essential with headers..they go togethor like shoes and laces. If you are not getting the car dyno tuned, and need a deal on say and SLP Predator..give us a call and we will put a package deal togethor for you!
Also if you call us at the right time, we may have coated headers instock ready to ship that same day!
Note: If we don't have precooated headers in stock, your headers will need to be sent to the coater. The can take a week to three weeks depending on lead times and the coating you order. Also to get free coating on Kooks, you much buy headers and an X-pipe. Lastly, the free coating coupon will not be honored on any brand but Kooks.
As always if you want Kooks uncoated give us a call for our best price!
-------------------------------------------------------------------
Kooks Headers-
Kooks is our most popular Corvette header line. They fit great, and simply perform awesome! We have Kooks 1 3/4", 1 7/8" and 1 7/8" Z06 headers in stock and ready to ship. Additionally, we have 1 3/4" & 1 7/8" C6 headers Kooks already coated in extreme sterling and ready to ship. No other vendor is laying out the money to precoat headers so they can ship same day you order them. We are the largest Kooks dealer on the east coast, and stock these headers, allowing us to provide better service than the rest.
You can always call us at 443-730-9428 with questions or to order!
View Our entire Kooks C6 header lineup here-
http://marylandspeed.com/corvette-c6...c-148_226.html
Sale details-
These specials all include free shipping!
If you want coated headers-
Use Coupon Code freecoatkooks on our website to get free standard coating on your headers. Our standard coating is Jet Hot 1700 degree Extreme Sterling or any of PM-FL's 2000 degree coatings! Note: You must buy headers and a crossover to get the free coating on the headers.
Both are better coatings that what most the other guys even offer, and the 1700 Exteme Sterling normally runs $280.
You can also call to redeem this special.
If you want uncoated headers-
If you want uncoated headers, you will have to call us at 443-730-9428 to receive a quote. Due to the competition out there, we cannot post our prices..but they are very competive (especially if you are looking for other parts in a package). It will be a call that is very worth your while.
A few other notes-
-----------------------------------------------------------------
SLP Headers-
We are an SLP warehouse distributor, and are excited to offer their C6 complete C6 header package at the lowest price allowed!
Where before you used to have to order all the parts for SLP's header system seperatly, now you can order everything under one new PT#30124!
This new Part number comes with 1 3/4" 409 stainless coated headers, 3" Catted X-pipe, and all hardware needed for the install. These headers look, perform, and fit great.
We have them on sale at the link below for $1,619.96 plus shipping..which is signifigantly lower than many other systems on the market!
---------------------------------------------------------------
StainlessWorks Headers-
MarylandSpeed is also a StainlessWorks Headers Warehouse distributor. StainlessWorks makes high quality headers from the the best Everlast 304 Stainless Steel Available!
We have StainlessWorks Headers with X-pipe and everything need to install starting as low as 1,324.07 for an Off Road setup!
You can order Stainless works headers at the link below-
http://marylandspeed.com/stainlesswo...or-p-1056.html
-------------------------------------------------------------------
Important Note!
When price shopping, we like to remind customers to get a total shipped price. A lot of competitors like to make their prices real low, but then hit you with $100 or more shipping at the last minute making their once awesome deal more than our price. We think these backdoor tactics are wrong and give you shipped prices up front. If a competior is lower, let us know and we will beat them.
On top of that, do a search on our company on the internet, and you will find a basically perfect customer service record in almost 5 years of being in business.
----------------------------------------------------------------------------------------------------------------
www.MarylandSpeed.com- Unmatched Service & Great Prices!
We Have a Sale on Kooks Headers Going!
Current Poject- 2007 Loaded Machine Metallic LT3, A6 Targa (Not Stock
)
07-16-2008, 02:35 PM
#7
Former Vendor
Thread Starter
This is Kooks PT# 6600-EX coated in Extreme Steling coating. Also picture is the bolts, O2 Extensions, and Alumium Gaskets you get with the headers.
Same Headers from another angle
Up close and personal with the coating. I call it 7/8's chrome. It is not as brilliant and clear..but unless you less than a foot away you would never know.
This is the inside of the collector. All the coatings we do are done inside and out for extra thermal protection and coating longevity. The outside coating is polished, where the inside is not.
The complete package! This is the most popular combo we sell. It is Kooks 6600-EX (w/Coating), and Kooks 3 x 2.5" Crossover PT# 6608S (uncoated). This picture is great because it shows how much better the coated finish looks compared to the plain welded stainless steel X-pipe. Before the coating process, Jet Hot cleans the headers, and will remove and weldslag or imperfections they can without damaging the product.
On another note, we do not recommend coating the crossover because the extra thickness it adds makes it very hard to slide the extension pipes on the X-pipe. Also, once the exhaust is under the car, and out the engine bay the coating has done it's thermal job.
This whole setup runs only $1,699.58 w/ Free Coating and Shipping and is in stock ready to ship today! It should be the best price out there for this coated setup.
Same Headers from another angle
Up close and personal with the coating. I call it 7/8's chrome. It is not as brilliant and clear..but unless you less than a foot away you would never know.
This is the inside of the collector. All the coatings we do are done inside and out for extra thermal protection and coating longevity. The outside coating is polished, where the inside is not.
The complete package! This is the most popular combo we sell. It is Kooks 6600-EX (w/Coating), and Kooks 3 x 2.5" Crossover PT# 6608S (uncoated). This picture is great because it shows how much better the coated finish looks compared to the plain welded stainless steel X-pipe. Before the coating process, Jet Hot cleans the headers, and will remove and weldslag or imperfections they can without damaging the product.
On another note, we do not recommend coating the crossover because the extra thickness it adds makes it very hard to slide the extension pipes on the X-pipe. Also, once the exhaust is under the car, and out the engine bay the coating has done it's thermal job.
This whole setup runs only $1,699.58 w/ Free Coating and Shipping and is in stock ready to ship today! It should be the best price out there for this coated setup.
