09C6Vert

My 09 Vert just arrived (pics later). Wanted to put Mikes stripes on the hood and in addition put a clear bra on afterward.

Told by the installer at fourm dealer that they want to cut around the stripes because moisture will be able to get under the bra causing problems if they don't.

Anyone dealt with this?

Pocket Aces

I could see some moisture seeping into the little arear at the edges of the overlap. Not sure what this would do to the paint over time. I would not think it would be that much of a problem though. Cutting around the stripes will most likely leave razor marks visible upon removal.

Duke/Earl

I didn't want the clear bra covering the fender stripes on mine. So, I'm going without. Using a stretchy add-on bra for road trips. My installer will do just the front fascia and mirrors. May have this done.

I do have the clear windshield protection, it was cut down in size so that it would not cover the Corvette decal there.

09C6Vert

Whoa never thought this "Might" be a problem. I might just cut the strips at an angle and stop them before the clear bra, which is 1/2 way up the hood.

Thanks for any help/thoughts

jimmie jam

i can't see how moisture would get under the clear material. they put the 3M on my CTS right over the painted pin stripes. been there for a year with no issues.

JamRWS6

We had the stripes covered on our RFZ and you can't tell there is something over the stripes other than they look painted on as the finish is smooth

I also have the clear covering the "Ram Air" decals on my 02 WS6 with no issues as well.

09C6Vert

Somone told me to put the stripes over the clear bra- I'm thinking

I Think I'll put the bra on then worry about the stripes