When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's fundementally no different then the C5, remove the OEM incandescent w/holder and solder in the new LED/resistor, I've already done the DIC and it was MUCH easier then the C5. We've been doing the C5 for years and have hundereds of very happy customers... The C6 does have some funky bulb/holder assemblies though but they weren't an issue at all with my soldering/desoldering/hot air staton.
[IMG][/IMG]
We don't offer cores anymore as we got burned too many times, so the customer sends us all of his components for the modifications. And as far as it not being feasible because of the swithces wearing out... well that's just nuts. In 7 plus years I haven't had one C5 owner come to me saying his ******* switch wore out and he needs another one. IF that occured he/she would send me their old and new switch in and I would swap the LEDs over for a very minimal charge.
Pricing will be the same for the C6 as it is for the C5, our prices are set per LED in most swithces.Some that require extra work will be a little more like this selective ride control: