Did My Own Halos And Spoiler - Pics
#21
Burning Brakes
I did my own halo job on my headlights. I painted the bezel satin black, painted the chrome rings around the headlights to match the car, and cut down the blinker bulb to make a matching ring to mount the switchback halos. I used 60 mm, 70 mm and 90 mm halos from diode dynamics.
#22
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,271
Received 1,681 Likes
on
1,303 Posts
C6 of Year Finalist (appearance mods) 2019
#23
Intermediate
Thread Starter
The halos were $50 - $65 per pair. The JSB spray paint system was about $80, but its a 3-stage so its more expensive than normal 2-stage colors. I used duplicolor trim and bumper paint for the headlight buckets, about $6. Then 3M tape and RTV is maybe $10. I had some etching primer for the metal rings lying around, as well as primer for the headlight buckets. The Radio Flyer wiring harness that I have ordered to separate the DRL and turn signal wiring is $110, but that is optional.
Then of course, about $3000 in my own personal labor.
Then of course, about $3000 in my own personal labor.
#24
Former Vendor
The halo listing can be found here on our site:
Diode Dynamics HD LED Halos for 2005-2013 Chevrolet Corvette C6
Thanks again @DubGA for the pictures! You did a fantastic job with your headlight build!
Nick C.
Diode Dynamics HD LED Halos for 2005-2013 Chevrolet Corvette C6
Thanks again @DubGA for the pictures! You did a fantastic job with your headlight build!
Nick C.
#25
Former Vendor
Just a heads up, we now have an HD halo listing up for the tails!
Tail Light HD LED Halos for 2006-2013 Chevrolet Corvette (four)
USA-made, and absolutely perfect for this application
Nick C.
Tail Light HD LED Halos for 2006-2013 Chevrolet Corvette (four)
USA-made, and absolutely perfect for this application
Nick C.
#26
Originally Posted by Diode Dynamics
Just a heads up, we now have an HD halo listing up for the tails!
Tail Light HD LED Halos for 2006-2013 Chevrolet Corvette (four)
USA-made, and absolutely perfect for this application
Nick C.
Tail Light HD LED Halos for 2006-2013 Chevrolet Corvette (four)
USA-made, and absolutely perfect for this application
Nick C.
The following users liked this post:
Diode Dynamics (04-06-2018)
#27
Former Vendor
#29
Racer
#30
Intermediate
I have same.problem with the ambers always on due to DRL and turn signal being the same wire.
You said.you got a wiring harness from Radio Flyer..can you please explain that is that an , how do install it...I hope I dont have to pull out the headlights for this.
Great job on the Vette.
You said.you got a wiring harness from Radio Flyer..can you please explain that is that an , how do install it...I hope I dont have to pull out the headlights for this.
Great job on the Vette.
#31
Looks great!! I love it! Do you think you could post a parts list for the build? I'm not worried about the process, as I've baked headlights before to modify them, etc. I'm trying to source a parts list to do it myself instead of buying an expensive kit.