SW

First, thanks for the comments. The front of the C6 Z is similar to the C5 where you can cut the bushings on the adjusters to lower it more. The rear is different, you can't just install longer bolts, it's just like the front. I started by taking the bolts out and cutting the bushings, reinstalled them all the way down. I looked good, but I wanted more. I ended up talking the front bolts completely out and leaving the rear adjusting bolts in. This is as low as you can get it in the front. I wanted to be able to adjust the rear up alittle because I like a little rake in the car. I also took all shocks off and cut the bump stops down so there will be enough travel. I haven't aligned it yet, but even without a correct alginment, the car seems to turn in better and rides like stock. It's low, but still very drivable. Going into my driveway, I have to go at a angle and the bottom lower air dam just touches alittle. The uppersplitter doesn't come close. I still want it driveable for the wife, so my modding will be conservative..

As far as wheels, I haven't decided what I'm going to do. The blk wheels look great, but I don't want to copy my buddy John Pages Z. I'm still looking around.

phantasms, I can't wait until you get your car and you are right about the sticker..

SW

here's a side shot..

Rkreigh

car looks great and I liked getting another peak at that nasty TA

I still love those cars. just read about your camaro in popular hot rodding. very nice!!

I still have a burning desire to do a TT 70-73 formula or TA with a BB chevy as the basis. I have a spare 605 bowtie engine lying around that might just end up there. heavy, but NICE!!!!

SW, if you you see a "non matching" MUTT TA or better still formula with a nice body (no rust, good paint) give me a shout. prefer the automatic, but drive train isn't too important.

I think the black z really looks HOT

say hi to the TX gang for me.

SW

I'm always looking around for those, I will let you know if I find something.

thanks, SW

Webfoot

Black rims would totally finish the look!!!

GaryZ06

With a polished lip.

DDSLT5

[QUOTE=RkreighI think the black z really looks HOT[/QUOTE]


So do I! That really looks badass lowered!!

Luweegy

Can someone show me a pic of these bolts?I'll go out to the garage and do it tonight.I have same color with tinted widows,polished wheels.Car looks awesome.I think I'll just lower it as far as stock bolts will go.Just need to see them.Thanks.
Tom

mike1952

I saw the car Saturday night and it looked great lowered!

Mike

EMINENT 1

Hot damn! That's bad!

Thanks for the pics!

SW

Thanks Mike, your looked great also.

I'm really confused on what rims to go with...

SW

mike1952

I've got HRE540s ordered for mine. Brushed center and polished lip.

looks good with silver......

Mike

LPE385

SW, what wheels are you going to put on the car, Fikse or HRE's. The car looks strong dropped.

J.C.

RyanZ06

That car looks like trash...

Georgie did a nice job lowering it

I told you what wheels you need.. 19/20" Iforged Aeros, or 19/20" fully polished FM5's...

dgdoc

Was wondering if you could measure the clearance under the center of the nose -- I think this is called the splitter.

On mine, without any mods, it is sitting at 4".

Thanks.

YELLOHHH

I just can't get over your garage (The cars aren't bad either). I see that the cars get parked sideways in the garage, which begs the question, what is the square footage of your garage? Do you have any more pics that show the floor plan of your garage? How many cars total will fit? Also, what is the ceiling height? Sorry for so many questions.

EVIL_C5

damn sw, that thing looks hot!

get ya some iforged or hre's with black centers to complete the "SW look"

SW

3 1/2" center of top splitter..

SW

jrz1

too low for my tastes. starting to look a little silly. just my opinion and you know about those....

SW

PM sent..

SW

Raced Guy

SW it looks very mean. And man do you have a good taste in cars, i am jealous !!!