H/C/I package TAMPA?! HELP
#1
H/C/I package TAMPA?! HELP
Hey guys!
I have a 08 Z that has 18k on the clock and I'm basically terrified of driving it at this time afraid that its gonna drop a damn valve into the motor. With that being said it needs addressed, and while it is under the knife I would like to go ahead and install a cam, headers, maybe a intake, maybe just port the factory one etc... but it is getting tiring trying to find a good reputable shop here in the Tamp Bay area. I won't list names.. but some shops I hear about or have seen mentioned don't answer my emails, don't answer my phone calls... other shops I've put the pieces together on recent threads and guys are saying they f***** up their wheels, their paint, etc... like I can't win for losing on this decision. Any help with shops that people have had positive experiences with in the recent past. Also maybe wouldn't hurt if I could get some info on decent pricing within these shops. Any help or direction at this point is appreciated guys. Thanks in advance!
I have a 08 Z that has 18k on the clock and I'm basically terrified of driving it at this time afraid that its gonna drop a damn valve into the motor. With that being said it needs addressed, and while it is under the knife I would like to go ahead and install a cam, headers, maybe a intake, maybe just port the factory one etc... but it is getting tiring trying to find a good reputable shop here in the Tamp Bay area. I won't list names.. but some shops I hear about or have seen mentioned don't answer my emails, don't answer my phone calls... other shops I've put the pieces together on recent threads and guys are saying they f***** up their wheels, their paint, etc... like I can't win for losing on this decision. Any help with shops that people have had positive experiences with in the recent past. Also maybe wouldn't hurt if I could get some info on decent pricing within these shops. Any help or direction at this point is appreciated guys. Thanks in advance!
#2
Drifting
I think Fasterproms is close and then Vengeance Racing is 4-5 hours from you I think.
I have some heads for sale, Brodix BR7’s done by LME $4k shipped to whichever shop you choose. PM me for details.
I have some heads for sale, Brodix BR7’s done by LME $4k shipped to whichever shop you choose. PM me for details.
The following 2 users liked this post by Innovate:
drewz06 (02-02-2020),
Zack Horton (02-02-2020)
#3
thing knower
I know it's out of the way a bit but redline motorsports in pompano seem to have their **** together...
had them do my baseline dyno the other day and they've got a nice shop with plenty of cars/motors in progress.
I haven't had them do a tune or work, but speaking with Howard was insightful, and will definitely be bringing my car there for a tune once I finish the build.
if I wanted a shop to do the work, I wouldn't hesitate to send my z there. Howard was genuinely interested in my build and took the time to talk to me without feeling rushed / take my money & next customer please
p.s. 73k on my stock ls7.... doing the heads because yeah.... going to measure and see if they had the problem
had them do my baseline dyno the other day and they've got a nice shop with plenty of cars/motors in progress.
I haven't had them do a tune or work, but speaking with Howard was insightful, and will definitely be bringing my car there for a tune once I finish the build.
if I wanted a shop to do the work, I wouldn't hesitate to send my z there. Howard was genuinely interested in my build and took the time to talk to me without feeling rushed / take my money & next customer please
p.s. 73k on my stock ls7.... doing the heads because yeah.... going to measure and see if they had the problem
Last edited by drewz06; 02-02-2020 at 11:44 AM.
The following users liked this post:
Zack Horton (02-02-2020)
#4
Melting Slicks
Hey guys!
I have a 08 Z that has 18k on the clock and I'm basically terrified of driving it at this time afraid that its gonna drop a damn valve into the motor. With that being said it needs addressed, and while it is under the knife I would like to go ahead and install a cam, headers, maybe a intake, maybe just port the factory one etc... but it is getting tiring trying to find a good reputable shop here in the Tamp Bay area. I won't list names.. but some shops I hear about or have seen mentioned don't answer my emails, don't answer my phone calls... other shops I've put the pieces together on recent threads and guys are saying they f***** up their wheels, their paint, etc... like I can't win for losing on this decision. Any help with shops that people have had positive experiences with in the recent past. Also maybe wouldn't hurt if I could get some info on decent pricing within these shops. Any help or direction at this point is appreciated guys. Thanks in advance!
I have a 08 Z that has 18k on the clock and I'm basically terrified of driving it at this time afraid that its gonna drop a damn valve into the motor. With that being said it needs addressed, and while it is under the knife I would like to go ahead and install a cam, headers, maybe a intake, maybe just port the factory one etc... but it is getting tiring trying to find a good reputable shop here in the Tamp Bay area. I won't list names.. but some shops I hear about or have seen mentioned don't answer my emails, don't answer my phone calls... other shops I've put the pieces together on recent threads and guys are saying they f***** up their wheels, their paint, etc... like I can't win for losing on this decision. Any help with shops that people have had positive experiences with in the recent past. Also maybe wouldn't hurt if I could get some info on decent pricing within these shops. Any help or direction at this point is appreciated guys. Thanks in advance!
Thanks HT
The following users liked this post:
Zack Horton (02-02-2020)
#5
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,261
Received 3,095 Likes
on
2,079 Posts
2021 C6 of the Year Finalist - Modified
The following users liked this post:
drewz06 (02-02-2020)
#6
Man I’m in pompano every other week for work almost. So I’m familiar with the area and that’s not too bad of a drive in my opinion for a reputable shop that I’m not pulling my hair out to deal with. I’ll give you guys a call early this next week! Thanks for reaching out and thanks for the info guys I appreciate it!
The following users liked this post:
drewz06 (02-02-2020)
#7
Melting Slicks
Man I’m in pompano every other week for work almost. So I’m familiar with the area and that’s not too bad of a drive in my opinion for a reputable shop that I’m not pulling my hair out to deal with. I’ll give you guys a call early this next week! Thanks for reaching out and thanks for the info guys I appreciate it!
#8
Race Director
If Antivenom is still in business, I wouldn't let that incompetent jackass touch my weed whacker.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
Last edited by WICKEDFRC; 02-02-2020 at 04:10 PM.
The following users liked this post:
Dane@LGmotorsports (02-03-2020)
#9
Melting Slicks
If Antivenom is still in business, I wouldn't let that incompetent jackass touch my weed whacker.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
The following users liked this post:
Dane@LGmotorsports (02-03-2020)
The following users liked this post:
Zack Horton (02-06-2020)
#11
Team Owner
If Antivenom is still in business, I wouldn't let that incompetent jackass touch my weed whacker.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
Installed the wrong sized push rods in my 2000 FRC during a Heads/Cam install that destroyed my engine. ******* left me high and dry.
Limped my car all the way up to LG Motorsports on 3 cylinders where Lou and his team did me right.
Still waiting for that incompetent jackass to man up to the damage he caused (which of course, will never happen).
You've been warned.
Good luck.
EDITED: Just checked. ******* went out of business.
#12
Team Owner
#13
Team Owner
I will also say that sometimes phone calls are not the way to go..if you can stop by in person and see what the shop has to offer and some stuff they are doing its 100% better...see the quality of work...meet some customers....
Last edited by pewter99; 02-05-2020 at 01:05 PM.
#14
#15
Team Owner
over the last 10+ years he has:
installed my Borlas on my Z06
rebuilt my wifes motor in her 02
built me a forged motor for my supercharged C5 and redid it at his cost when we had a ring not seat...no drama..just did it
repaired my Maggie blower
more motor work to the wifes 02
headers on my Z06
fixed my valve issue on my Z06
helped us part out my wifes 02
helped me part out my 99
installed headers on my wifes 2012 GS
GM warranty work on my wifes 2012
just completed a cam install and tune on my Z06
and countless other things over the years from complete torque tube rebuilds to general maintenance, tire installs...I could go on
there are very few people I will refer to do anything...I mean probably less than 5......Joe is one of those people
Last edited by pewter99; 02-07-2020 at 12:04 AM.
The following users liked this post:
musclesbmf (02-07-2020)
#16
it already had heads, cam and everything else running on E85.
Took it there for a meth install which they did an outstanding job on the install. Then the starter went bad so replaced that and since half the exhaust was already down replaced the clutch. Then my reinforced intercooler bricks started pissing into the engine and thankfully Joe found the issue before I blew up the motor and we got some Kong bricks in there now. He also put in a new intercooler pump and some other stuff.
He's also done some of my friends cars. Very cool guy to talk to. Definitely go by and talk to him and tell him "the hulk" sent you.
Mark