Build update
Feb 1, 2007 | 06:55 AM
Pro
Joined: Feb 2005
Posts: 550
Likes: 0
Quote:
Originally Posted by
FunCool
If you did that with a 3.0 Pulley, that's a great number.
I've got a 402 with a 112 Maggie with a 8" Crank and a 2.65 pulley & 90mm snout.
Can you post your dyno?
Love to compare it to my dyno, and see how the low end torque compares.
Ya, ya, I know, I need a tune. :o
what is your cr and how psi is your boost verynice #,s
Feb 1, 2007 | 07:25 AM
Pro
Joined: Jun 2006
Posts: 589
Likes: 0
From: Cincinnati OH
Quote:
Originally Posted by
Chris310P
New seats!
OMG!!!!!
Please tell us where we can get more info on these!!!!!!!!!
Feb 1, 2007 | 08:37 AM
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 755
Likes: 0
From: Mansfield TX
Here is the funny part on the seats guys -- These are the same kind of seats that I had in my C5 LPE car. They are actually modified Viper SRT/10 seats. It does retain all the electric functions using the Vette seat rails. Luke at 21CMC did the work. Here is a pic of the ones out of my C5
Last edited by cjz06; Feb 1, 2007 at 05:38 PM .
Feb 1, 2007 | 10:04 AM
Joined: Feb 2006
Posts: 1,227
Likes: 0
From: Friendswood Texas
St. Jude Donor '06-'07-'08
Does he just get them straight from LPE? If so, I will give them a call today!
Feb 1, 2007 | 10:05 AM
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 755
Likes: 0
From: Mansfield TX
Quote:
Originally Posted by
pennys58
Does he just get them straight from LPE? If so, I will give them a call today!
No I purchased them off ebay and had Luke do the work to make them fit to the C6 rails. There is a guy that sells them new in the box.
Feb 1, 2007 | 05:55 PM
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Quote:
Originally Posted by
blue racer c6
what is your cr and how psi is your boost verynice #,s
My CR is 10.5 to 1 and my boost is 8lbs right from idle and 8.5lbs around 6000 rpms.
Feb 1, 2007 | 08:25 PM
Burning Brakes
Joined: Mar 2006
Posts: 946
Likes: 0
From: Midland, TX........ 550 RWHP/520 RWTQ (A6)
(FunCool) And I thought I had traction problems
Love the seats Chris........
Last edited by Bushong572; Feb 1, 2007 at 08:28 PM .
Feb 2, 2007 | 05:53 PM
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Quote:
Originally Posted by
Bushong572
(FunCool) And I thought I had traction problems
Love the seats Chris........
I can't wait for the 3.73 gears and 2.5 blower pulley!!! Then we can talk about traction problems.
P.s
I have 250 shot too.
10 Ugly Corvettes That We Still Kinda Love
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
10 Things Every Corvette Owner Needs (2026 Edition)
8 Most "Only Corvette Owners Understand" Quirks and Problems
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
How Much Horsepower Every Corvette Engine "LOST" in 1972
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Feb 2, 2007 | 08:34 PM
Safety Car
Joined: Oct 2001
Posts: 4,945
Likes: 0
From: Dallas/Valley Ranch TEXAS!!!
Feb 4, 2007 | 10:06 PM
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 755
Likes: 0
From: Mansfield TX
Quote:
Originally Posted by
Mr.Big
Thanks! It might be ready this week!
Feb 4, 2007 | 11:22 PM
Pro
Joined: Feb 2005
Posts: 550
Likes: 0
Quote:
Originally Posted by
Chris310P
Thanks! It might be ready this week!
should be a hand full looking forward to your #,s
I think I am a couple week,s out
Feb 5, 2007 | 10:22 AM
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 755
Likes: 0
From: Mansfield TX
Quote:
Originally Posted by
blue racer c6
should be a hand full looking forward to your #,s
I think I am a couple week,s out
Me too!
Feb 5, 2007 | 06:42 PM
Safety Car
Joined: Oct 2001
Posts: 4,945
Likes: 0
From: Dallas/Valley Ranch TEXAS!!!
Quote:
Originally Posted by
Chris310P
Me too!
