Need Jacking tips
Thread Starter
Racer
Joined: Jun 2007
Posts: 351
Likes: 0
From: South Jersey
Need Jacking tips
I haven't bought jacking pucks yet. Is there a correct "BMW" type to use? Also, I notice some have used a steel bar placed on jackstands, across the front or rear. Where is the proper support point for this? 
Race Director
Joined: Mar 2005
Posts: 11,549
Likes: 27
From: Southampton NJ
i just slide the floor jack under the midile in the back and lift both wheels off. same for the front, but i have to put a little bottle jack their to get it high enough to clear the front rubber to get under the frame
CF Senior Member
Joined: Feb 2006
Posts: 23,313
Likes: 25
From: Tucson Arizona
Here are some links you'll find useful:
http://forums.corvetteforum.com/show....php?t=1301555
Modifying Northern tool support beam for use on Craftsmen floor jack:
http://forums.corvetteforum.com/show....php?t=1329729
Link to Northern Tool adaptor beam:
http://www.northerntool.com/webapp/w...=47686&R=47686
http://forums.corvetteforum.com/show....php?t=1301555
Modifying Northern tool support beam for use on Craftsmen floor jack:
http://forums.corvetteforum.com/show....php?t=1329729
Link to Northern Tool adaptor beam:
http://www.northerntool.com/webapp/w...=47686&R=47686
