Upper Control Arm Studs
Le Mans Master
Joined: Jul 2005
Posts: 5,328
Likes: 405
I don't know the size but I'm guessing you're doing the "shim" mod to the upper control arm to make changing from street to race alignment easier. In any case, make sure the stud/nut you use is the same or greater strength as the bolt you're replacing to prevent catastrophic failure..it could have disasterous results.
Thread Starter
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
I don't know the size but I'm guessing you're doing the "shim" mod to the upper control arm to make changing from street to race alignment easier. In any case, make sure the stud/nut you use is the same or greater strength as the bolt you're replacing to prevent catastrophic failure..it could have disasterous results.
