Help with pushrod length..
Thread Starter
Racer
Joined: Sep 2008
Posts: 448
Likes: 0
From: West Monroe La. (Fastest Bolt On M6)
Help with pushrod length..
I am installing spins 230/234, 612/598 cam next week and i wanna make sure i get the right pushrods..Do i need to stay with the stock 7.400 or what? Thanks..
Jonathan..
Jonathan..
Burning Brakes
Joined: Nov 2006
Posts: 793
Likes: 1
I have done many searches on this subject and the most common answer that I heard is that you really should measure for new pushrods using a pushrod length checker. I got a lot of responses saying that "x" length pushrod "should" work, but I decided to spend the $12 on a length checker and measure myself for peace of mind.
Measuring is the only way to know for sure.
Le Mans Master
Joined: Jul 2005
Posts: 5,328
Likes: 405
Make sure you get the correct range "checking" pushrod for your application. The folks at Comp Cams should be able to tell you which one to get, I always go to them and they haven't missed yet. If you don't understand the info in the link above, I'm sure somebody at Comp Cams will help you but it's really not that difficult once you get into it.
