LS9 Oiling System
Le Mans Master
Joined: Feb 2002
Posts: 5,394
Likes: 281
From: cumming ga
z51vett
Le Mans Master
Joined: Jan 2003
Posts: 8,596
Likes: 19
From: Portland Oregon
Its not going to be very cost effective to do this. The external parts such as the dry sump tank and lines are easy enough to install. But the LS3, LS9 and the LS7 dry sump engines all have a 1" longer crank shaft snout so that it can use the special oil pump that makes it all work. That means that you would either have to remove the engine to install the correct crank, oil pump, front cover and oil pan to make it all work or swap the engine out for a dry sump equipped LS3, or LS7 engine.
Advanced
Joined: Feb 2009
Posts: 97
Likes: 0
From: Sanford FL
With a blower there is no room up top. You would have to use the style that will mount in the place you remove your AC compressor. That is the best system but mine is mostly street driven abd I cant give up ac in Florida
Speedy
Joined: Mar 2007
Posts: 6,110
Likes: 931
From: Tn
2024 C8 of the Year Finalist - Modified
ill take a look at where there is room to mount the pump, you could expand your market by making a bolt on kit for sc cars
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
