Pull codes
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 854
From: Daytona Beach FL
You need a CAN capable code scanner to hook up to your OBD II port.
The problem is, most of those tools can't read much in the way of ABS codes - you may need a Tech 2 to get the ABS codes you need to make a good diagnosis.
What kind of problems are you having with your ABS - Just some DIC messages, or are the brakes doing something weird?
Bob
The problem is, most of those tools can't read much in the way of ABS codes - you may need a Tech 2 to get the ABS codes you need to make a good diagnosis.
What kind of problems are you having with your ABS - Just some DIC messages, or are the brakes doing something weird?
Bob
Thread Starter
Instructor
Joined: Mar 2008
Posts: 103
Likes: 0
Hi.
The ABS and tracktioncontrol stop working when i drive about 1 mile or hit the gas fast.
Also hve some truble with the engine light, sometimes when i start the engine the check engine lamp goes on and the rev counter doesn´t move and the engine runs bad?
Thanks
The ABS and tracktioncontrol stop working when i drive about 1 mile or hit the gas fast.
Also hve some truble with the engine light, sometimes when i start the engine the check engine lamp goes on and the rev counter doesn´t move and the engine runs bad?
Thanks
