Torque Spec Request
Thread Starter
Pro
Joined: Nov 2005
Posts: 525
Likes: 6
Torque Spec Request
I am changing the window regulator on my 2005 C6. This required me to unclamp a 14 mm bolt that locked the window to the electric window cable. There is a metal C with foam rubber inside, and a 14 mm bolt that tightened the clamp to hold the window in place.
I don't have a manual, could anyone tell me what the torque spec is for this bolt? I am guessing it's pretty low, maybe 8 ft/lbs.
Thanks,
John
I don't have a manual, could anyone tell me what the torque spec is for this bolt? I am guessing it's pretty low, maybe 8 ft/lbs.
Thanks,
John
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 851
From: Daytona Beach FL
My 2010 Service Manual says:
So....it's a very low torque!!
89 lb in is only a little more than 7 lb ft, so your guess was close enough.
Bob
Tighten the window regulator window clamp nuts to 10 N-m (89 lb in)
89 lb in is only a little more than 7 lb ft, so your guess was close enough.
Bob
