C6 front spring on a C5
Thread Starter
Melting Slicks
Joined: Mar 2009
Posts: 2,300
Likes: 115
From: Odessa FL
St. Jude Donor '10-'12-'13-'14-'15-'16-'17
C6 front spring on a C5
I posted this in the C5 section but no one seems to know, so hoping maybe someone here may have some information:
I was on the Hyperco web site viewing their offerings and noticed that their part number for a front spring (Track Series HPT) for a C5 or C6 was the same. Found that curious so I then searched this and a few other forums asking if a C6 front spring would fit a C5. Seems there is general consensus that the rears will not work. The results were not consistent about the fronts, so I am posting here to see if anyone has a definitive answer to the question.
Thanks.
I was on the Hyperco web site viewing their offerings and noticed that their part number for a front spring (Track Series HPT) for a C5 or C6 was the same. Found that curious so I then searched this and a few other forums asking if a C6 front spring would fit a C5. Seems there is general consensus that the rears will not work. The results were not consistent about the fronts, so I am posting here to see if anyone has a definitive answer to the question.
Thanks.
