Socket for axle nuts

Reply Subscribe

Thread Tools

Search this Thread

Nov 29, 2011 | 12:25 AM

#21

Rebel 1

Drifting

Joined: Apr 2010

Posts: 1,443

Likes: 7

From: Bristol raceway area

Quote:

Originally Posted by Gearhead Jim

You can use the link from Rebel 1 and see the old version of the bulletin, note that it has the incorrect torque value and the part # for the nuts may have changed again.

Your dealer can also print it and do the work for a price that may or may not be a good deal.

Jim, I have found that TSB #07-04-95-001 is the current doc. dated 10-1-2007.
Everything i have found on this lists 160 ft.lb. torque for axle nuts.
If this number is incorrect, i and probably others would like to know.

Bob

Nov 29, 2011 | 03:23 PM

#22

Gearhead Jim

Team Owner

Joined: Sep 2000

Posts: 25,023

Likes: 2,715

From: Far NW 'burbs of Chicago

St. Jude Donor '13

Quote:

Originally Posted by Rebel 1

So would I!

I thought I knew, but now I don't.

Perhaps someone can have their dealer look up the bulletin and print out a copy, or at least verify the torque numbers.

Nov 29, 2011 | 05:54 PM

#23

Cherokee Nation

Le Mans Master

Joined: Jan 2008

Posts: 6,457

Likes: 297

From: corpus christi Texas

Quote:

Originally Posted by Rebel 1

Yes it is.
I Checked Corvette Web Central.com and it shows TSB #07-04-95-001 as the current document for Corvettes.
It is dated Oct.1,2007. 160 ft.lb. torque value for axle nuts.

Bob

Thank you Sir

Nov 29, 2011 | 08:56 PM

#24

Rebel 1

Drifting

Joined: Apr 2010

Posts: 1,443

Likes: 7

From: Bristol raceway area

Quote:

Originally Posted by dardenken

Thank you Sir

Nov 29, 2011 | 10:31 PM

#25

Gearhead Jim

Team Owner

Joined: Sep 2000

Posts: 25,023

Likes: 2,715

From: Far NW 'burbs of Chicago

St. Jude Donor '13

Quote:

Originally Posted by Rebel 1

Yes it is.
I Checked Corvette Web Central.com and it shows TSB #07-04-95-001 as the current document for Corvettes.
It is dated Oct.1,2007. 160 ft.lb. torque value for axle nuts.

Bob

I hope this is true, but since that isn't an official GM site-
They might not have the latest bulletin, a problem I have seen before.

I'm too lazy to go to the dealere right now.

Nov 30, 2011 | 01:23 AM

#26

Rebel 1

Drifting

Joined: Apr 2010

Posts: 1,443

Likes: 7

From: Bristol raceway area

Quote:

Originally Posted by Gearhead Jim

I hope this is true, but since that isn't an official GM site-
They might not have the latest bulletin, a problem I have seen before.

I'm too lazy to go to the dealere right now.

When i go to the dealer about a TSB or a problem they look at me like a deer in headlights!

Feb 3, 2025 | 10:45 PM

#27

Shy Jackson

1st Gear

Joined: Feb 2025

Posts: 1

Likes: 0

33mm axle nuts work

Hey guys, I have a 2011 corvette grandsport, 33mm deep socket is what you need for the axle nut.

Feb 4, 2025 | 12:16 AM

#28

Dano523

Race Director

Joined: Dec 2013

Posts: 12,502

Likes: 3,631

Quote:

Originally Posted by Gearhead Jim

Our cars:
2006 = 33mm
2009 = 34mm

This, since if car is older, will need 33 to remove the old nut,a nd new replacement nut is going to 34mm instead.
But if you check with an auto parts store around you, should have the free loner tool program for both size sockets, since may never need the sockets for decades again.