First post was May 2014. I would have been an early buyer, but apparently something didn't work well and I lost interest along with everyone else.
Vararam Intake Manifold
Burning Brakes
Joined: Oct 2011
Posts: 978
Likes: 99
From: Virginia
I assume you are talking about an LS3 application? The Mamo/MSD for the LS7 is a big upgrade vs stock or the FAST manifold.
Mamo was pretty honest with me and told me the gains were small running the MSD even ported by him.
I had the radius rods added to the OEM intake by Gwatney Performance for $250 and the car pulls notably harder up top with this modification. It wasn't even a small difference.
I had the radius rods added to the OEM intake by Gwatney Performance for $250 and the car pulls notably harder up top with this modification. It wasn't even a small difference.
Drifting
Joined: Nov 2000
Posts: 1,477
Likes: 4
From: Florida 33460
Yes, we have components in house that are going through final phases of pre-production for assembly for some versions of our new manifolds . We are pushing to show them to the public just before SEMA . We will not be specific untill they are released , we have given our competition information each time we have tested or shown images in the past .We will not be doing that again untill they roll out to the public .
We also want to have product on the shelf to ship before we release pics, video, independent tests etc.. rather than tease our customers with something they cannot buy yet.
VR tech
We also want to have product on the shelf to ship before we release pics, video, independent tests etc.. rather than tease our customers with something they cannot buy yet.
VR tech
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,108
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Oct 2011
Posts: 978
Likes: 99
From: Virginia
Absolutely true! Vararam should do the right thing put out statement that it's not a viable product or they don't have the resources to bring it to market or something other than stringing people along.
In the meantime, there is a lot of horse power to be made with the Mamofied MSD.
In the meantime, there is a lot of horse power to be made with the Mamofied MSD.