Mystery Spring
Thread Starter
Racer
Joined: Dec 2007
Posts: 274
Likes: 32
From: Augusta MO
Mystery Spring
Just driving along and this spring fell out from under the dash onto my left foot.
I can't figure out where it came from and nothing seems to be operating any differently.
It is about the size of a silver dollar and pretty greasy.
Any ideas what it is for and where it goes?
I can't figure out where it came from and nothing seems to be operating any differently.
It is about the size of a silver dollar and pretty greasy.
Any ideas what it is for and where it goes?
Race Director
Joined: Dec 2013
Posts: 12,502
Likes: 3,629
Replace the broken C6 clutch pedal assist spring with a C5 clutch pedal assist spring.
The difference between the two springs and pedal feed back is huge, and will will be able to feel what the pedal is actually doing, instead of the dead feeling you get with the C6 spring just over springing the pedal back up during clutch engagement stage instead.
https://www.corvetteforum.com/forums...edal-woes.html
P.S, with not spring and the oem master cylinder, the clutch pedal will hang down slightly, and your not going to be able to use the cruse control since the car thinks that you are pushing the pedal slightly down (clutch pedal switch that disengages the cruse control when you start to press the clutch pedal in).
The difference between the two springs and pedal feed back is huge, and will will be able to feel what the pedal is actually doing, instead of the dead feeling you get with the C6 spring just over springing the pedal back up during clutch engagement stage instead.
https://www.corvetteforum.com/forums...edal-woes.html
P.S, with not spring and the oem master cylinder, the clutch pedal will hang down slightly, and your not going to be able to use the cruse control since the car thinks that you are pushing the pedal slightly down (clutch pedal switch that disengages the cruse control when you start to press the clutch pedal in).
Last edited by Dano523; Jan 22, 2015 at 08:33 AM.
Thread Starter
Racer
Joined: Dec 2007
Posts: 274
Likes: 32
From: Augusta MO
nevermind...I'll google it.
Are either the spring or the Tick master hard to install myself?
My dealer wants $100 just to say hello to me every time I go in, (at least that was the last charge just to tell me what a dash error message specifically meant...).
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Dec 2013
Posts: 12,502
Likes: 3,629
C6 clutch pedal return spring #10376347 (larger coil one)
C5 clutch pedal return spring #12555205 (smaller coil one)
http://www.cultragfactoryparts.com/o...h_str=10376347
http://www.cultragfactoryparts.com/o...h_str=12555205
At less than $16 for both ( plus shipping), just order both and see which one you like the best.
As for the spring, it's easy to install, while replacing the master cylinder is a lot more complex (and a lot more money).
http://www.utahcorvette.com/2012/03/...return-spring/
C5 clutch pedal return spring #12555205 (smaller coil one)
http://www.cultragfactoryparts.com/o...h_str=10376347
http://www.cultragfactoryparts.com/o...h_str=12555205
At less than $16 for both ( plus shipping), just order both and see which one you like the best.
As for the spring, it's easy to install, while replacing the master cylinder is a lot more complex (and a lot more money).
http://www.utahcorvette.com/2012/03/...return-spring/
Last edited by Dano523; Jan 23, 2015 at 10:08 AM.
Racer
Joined: Aug 2012
Posts: 471
Likes: 3
From: virginia beach va
I had that spring break before. the replacement is very inexpensive (forgive me i can remember the exact price its been about 2 years) just go to the parts department, they might even have it in stock. it was inexpensive and definitely a DIY 
