c6 slave HELP!

Reply Subscribe

Thread Tools

Search this Thread

May 3, 2015 | 09:58 PM

curtisb23

Thread Starter

Drifting

Joined: Sep 2014

Posts: 1,774

Likes: 38

c6 slave HELP!

Has anyone ever got a bad slave cylinder from gm out of the box? my slave in the car was leaking not sure were at if it was the slave or the fast bleed but I decided to just replace the hole thing and now I can't get the pedal to pump up at all!!

Last edited by curtisb23; May 4, 2015 at 09:21 AM.

May 4, 2015 | 05:25 AM

Dano523

Race Director

Joined: Dec 2013

Posts: 12,502

Likes: 3,629

Quote:

Originally Posted by curtisb23

Has anyone ever got a bad slave cylinder from gm out of the box? my slave in the car was leaking not sure water at if it was the slave or the fast bleed but I decided to just replace the hoke thing and now I can't get the pedal to pump up at all!!

You did not install the end connector from the master to the slave cylinder connector correctly.

May 4, 2015 | 06:39 AM

curtisb23

Thread Starter

Drifting

Joined: Sep 2014

Posts: 1,774

Likes: 38

It is all the way in and the clip is holding it on place, I get fluid out of the bleeder just can't get any pressure in the pedal

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump