Needing Help.
Thread Starter
Burning Brakes
Joined: Jan 2004
Posts: 1,231
Likes: 81
From: Paris Tex
Needing Help.
this is the wheel I am trying to find the weight of..Thanks
Do any of you know the true weight of the HRE P40SC wheels in 19 Front / 20 Rear for C6 ZR1 fitment [Also being used on some C6 Z06's] . I have contacted HRE but they seem to want to sell me new wheels. Not to much on giving out information on wheels they have made and sold. Your help would be most appreciated. They are not listed on the parts weight chart on this forum...Thanks
Last edited by ROUTE 66; Feb 28, 2019 at 02:20 PM.
Former Vendor
Joined: Nov 2015
Posts: 1,597
Likes: 112
this is the wheel I am trying to find the weight of..Thanks
Do any of you know the true weight of the HRE P40SC wheels in 19 Front / 20 Rear for C6 ZR1 fitment [Also being used on some C6 Z06's] . I have contacted HRE but they seem to want to sell me new wheels. Not to much on giving out information on wheels they have made and sold. Your help would be most appreciated. They are not listed on the parts weight chart on this forum...Thanks
We do not record the weights of every single wheel we produce, rather occasional sets get weighed, so where we can give you a ballpark figure, we cannot be spot on accurate. If you were talking with me, I would have asked how accurate do you need the weight, and if you need a 100% accurate figure I would have asked you to remove the tires and weigh them since they're still in your possession.
The alternative is you could list the front/rear wheels sizing and offset and I can see what matches up on my end to what we have weighed in the past (again that's going to be an approximate number, not exact).
You can PM or email me if that's easier
Thread Starter
Burning Brakes
Joined: Jan 2004
Posts: 1,231
Likes: 81
From: Paris Tex
Wheels
I don't think we would have tried to sell you new wheels considering you already have them. None of us are pushy sales people since we do not sell directly to the public to begin with.
We do not record the weights of every single wheel we produce, rather occasional sets get weighed, so where we can give you a ballpark figure, we cannot be spot on accurate. If you were talking with me, I would have asked how accurate do you need the weight, and if you need a 100% accurate figure I would have asked you to remove the tires and weigh them since they're still in your possession.
The alternative is you could list the front/rear wheels sizing and offset and I can see what matches up on my end to what we have weighed in the past (again that's going to be an approximate number, not exact).
You can PM or email me if that's easier
We do not record the weights of every single wheel we produce, rather occasional sets get weighed, so where we can give you a ballpark figure, we cannot be spot on accurate. If you were talking with me, I would have asked how accurate do you need the weight, and if you need a 100% accurate figure I would have asked you to remove the tires and weigh them since they're still in your possession.
The alternative is you could list the front/rear wheels sizing and offset and I can see what matches up on my end to what we have weighed in the past (again that's going to be an approximate number, not exact).
You can PM or email me if that's easier
