mufflers
#1
mufflers
has anyone dissected the stock mufflers to get more of a rumble / noise ,, removing baffle's etc and re-welded them back up ?
Last edited by nobucks; 06-12-2019 at 03:37 PM.
The following users liked this post:
Shikaitsu (06-12-2019)
#4
so, read 3 million post, lol about 3 holes in the rear under tips , and 3 holes through the side and inner pipe , so, what one sounds better ?
the 3 in the back or 1-2 or 3 ? are fully fixable / plugged if you don't like it
the 3 through the side & inner pipe are permanent and not cheaply fixable
so , what one really sounds better
also, what about passing good ol California smog inspection ?
the 3 in the back or 1-2 or 3 ? are fully fixable / plugged if you don't like it
the 3 through the side & inner pipe are permanent and not cheaply fixable
so , what one really sounds better
also, what about passing good ol California smog inspection ?
#5
just went out and looked onto my stock tips [2005 C6 Z51]
looks like a baffle is there , kinda like a flat wall ? so what if you drill through that baffle on each tip ?
will you get a more direct sound ?
looks like a baffle is there , kinda like a flat wall ? so what if you drill through that baffle on each tip ?
will you get a more direct sound ?