Upgrading for winter. Am I missing anything?
Drifting
Joined: Jul 2005
Posts: 1,630
Likes: 188
From: Austin TX
Burning Brakes
Joined: Mar 2019
Posts: 833
Likes: 178
From: Indianapolis Indiana area
Don't do the gears. You won't want them with a PD blower. I did .3.73's in mine when I was on low boost and have since went back to 3.42's in a zr1 housing. With ported blower (Ironmask Airflow) SBE ls3 and a bigger cam then your doing I made over 750 lbs of torque by 2,700 rpm. If you're going to put some tires on it and take it to the track I'd do the ZR1 housing especially if you're changing housings anyways. You might look into a clutch tamer also.
Thread Starter
Heel & Toe
Joined: Dec 2023
Posts: 19
Likes: 4
Don't do the gears. You won't want them with a PD blower. I did .3.73's in mine when I was on low boost and have since went back to 3.42's in a zr1 housing. With ported blower (Ironmask Airflow) SBE ls3 and a bigger cam then your doing I made over 750 lbs of torque by 2,700 rpm. If you're going to put some tires on it and take it to the track I'd do the ZR1 housing especially if you're changing housings anyways. You might look into a clutch tamer also.
