Stroker LT1 Engine Dyno Graph Inside!!
11-29-2013, 07:47 PM
#1
Premium Supporting Vendor
Thread Starter
Stroker LT1 Engine Dyno Graph Inside!!
Guys here's the engine dyno video from the first Stroker LT1 engine ever fired. I know you have a lot of people on here selling package claiming flywheel hp without anything to back it up. That's exactly the reason why you don't see TSP selling hp packages after installing them one time. We extensively test combos before releasing them to the public. Starting Monday we will be shipping 630 flywheel hp heads cam packages! Now that we have several good h/c packages together we wanted to spend a little time on a few strokers. 
Today we finally got around to putting the stroker camshaft into the 416 stroker & it responded very well.
This engine is:
416cid
4.065" Forged Pistons
6.125" Rods
4" Stroke
11.8:1 Compression
PRC Ported Cylinder Heads
Texas Speed Test Camshaft
Today we finally got around to putting the stroker camshaft into the 416 stroker & it responded very well.
This engine is:
416cid
4.065" Forged Pistons
6.125" Rods
4" Stroke
11.8:1 Compression
PRC Ported Cylinder Heads
Texas Speed Test Camshaft
11-29-2013, 08:33 PM
#2
Guys here's the engine dyno video from the first Stroker LT1 engine ever fired. I know you have a lot of people on here selling package claiming flywheel hp without anything to back it up. That's exactly the reason why you don't see TSP selling hp packages after installing them one time. We extensively test combos before releasing them to the public. Starting Monday we will be shipping 630 flywheel hp heads cam packages! Now that we have several good h/c packages together we wanted to spend a little time on a few strokers.
Today we finally got around to putting the stroker camshaft into the 416 stroker & it responded very well.
This engine is:
416cid
4.065" Forged Pistons
6.125" Rods
4" Stroke
11.8:1 Compression
PRC Ported Cylinder Heads
Texas Speed Test Camshaft
Today we finally got around to putting the stroker camshaft into the 416 stroker & it responded very well.
This engine is:
416cid
4.065" Forged Pistons
6.125" Rods
4" Stroke
11.8:1 Compression
PRC Ported Cylinder Heads
Texas Speed Test Camshaft
12-02-2013, 05:29 PM
#10
Race Director
Member Since: Dec 2006
Location: Fort Worth, Texas
Posts: 11,114
Received 2,050 Likes
on
1,303 Posts
Very nice torque curve! This is with stock/unported intake as well?
