When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mike, your car looks great. Motivate me to place an order last night: Wickers with bolts and dual diffusers Will post a pick when I get them installed,
Mike, your car looks great. Motivate me to place an order last night: Wickers with bolts and dual diffusers Will post a pick when I get them installed,
To ACS: awesome product with a few recommendations:
1-Apply a Color Code Sticker on each fin with "P" for Passenger side and "D" for Driver side Fins. I didn't realize until i installed fin on wrong side because it didn't fit correctly and probably oversight on my part but A sticker would be helpful and avoid my mistake by others.
2-Why not have the C-Clamps already on the Fin as I broke two of them trying to spread to attach to Fin and had to go buy replacement clamps.
This is not a criticism but a consumer feedback for possible consideration. Otherwise, I am very happy with the product and install templates provided. Oh
Thank you for the feedback, I have already shared these internally.
We will begin installing the U-nuts, and considering adding a note.
We do engrave on the back side, Driver / Passenger side.
Originally Posted by KGrant
Installed my ACS Diffuser Fins today!
To ACS: awesome product with a few recommendations:
1-Apply a Color Code Sticker on each fin with "P" for Passenger side and "D" for Driver side Fins. I didn't realize until i installed fin on wrong side because it didn't fit correctly and probably oversight on my part but A sticker would be helpful and avoid my mistake by others.
2-Why not have the C-Clamps already on the Fin as I broke two of them trying to spread to attach to Fin and had to go buy replacement clamps.
This is not a criticism but a consumer feedback for possible consideration. Otherwise, I am very happy with the product and install templates provided. Oh
U-Nuts and Note for Diffuser Fin Install Instructions
I noticed the engraving on back of Fins after the fact, so a bright colored note to separate passenger from driver side as well as already having the clamps on the Fin would be awesome. Thanks for being open to receiving constructive consumer feedback as that is what great companies do as continuous improvement!
Originally Posted by ACS Composite
Thank you for the feedback, I have already shared these internally.
We will begin installing the U-nuts, and considering adding a note.
We do engrave on the back side, Driver / Passenger side.
Is there any windtunnel or CFD testing on this? Or is it just a "looks" thing?
I have never seen any wind tunnel testing done on these diffuser fins, but I would be curious if they have any performance effects. I think the vast majority of us who have installed these on our cars did it strictly for looks.
I have never seen any wind tunnel testing done on these diffuser fins, but I would be curious if they have any performance effects. I think the vast majority of us who have installed these on our cars did it strictly for looks.
need speeds over 130 + to work, if they do, the C7R difuser is inches from the ground
Saw a C7 Silver Z06 in front of me and had fins - to see them for real is way better looked awesome - also it was Silver full Z07 package I hardly see any C7'S never mind being the same color as mine
Will post a pick when I get them installed,
