Wheel weight
Thread Starter
Melting Slicks
Joined: Aug 2008
Posts: 3,023
Likes: 462
From: Toronto Ontario
Wheel weight
A 19x10.5" wheel and 20x12.5" wheel (fully forged monoblock) each weigh 26.8 and 26.2lbs. respectively.
Are those weights considerd light, normal or heavy for that size of wheel?
weird the smaller narrower wheel is a tiny bit heavier.
Are those weights considerd light, normal or heavy for that size of wheel?
weird the smaller narrower wheel is a tiny bit heavier.
Last edited by Cman01; Feb 3, 2021 at 07:42 AM.
Drifting
Joined: Oct 2007
Posts: 1,433
Likes: 492
From: NY
Those weights seem heavier than I might expect for the "average" forged aluminum wheels IMO, by a couple of pounds or so each.
For reference, HRE lists their beautiful R101 LW at 18lbs for the 19x10.5" and 19.4lbs for the 20x12.5". Granted that's a high end forged aluminum wheel, so I'd expect more economical options to weigh more.
If HRE reads this, I'd happily accept a sponsored set for my z06, in gloss black please.
For reference, HRE lists their beautiful R101 LW at 18lbs for the 19x10.5" and 19.4lbs for the 20x12.5". Granted that's a high end forged aluminum wheel, so I'd expect more economical options to weigh more.
If HRE reads this, I'd happily accept a sponsored set for my z06, in gloss black please.
Thread Starter
Melting Slicks
Joined: Aug 2008
Posts: 3,023
Likes: 462
From: Toronto Ontario
Yeah, that would be a nice wheel and light too but almost US$2500 each is a bit much to swallow.
I started this thread I'm in line first for a sponsored set of that HRE wheel in dark brushed titanium finish please HRE PLEASE???????
I started this thread I'm in line first for a sponsored set of that HRE wheel in dark brushed titanium finish please HRE PLEASE???????
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,108
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
The larger issue than the net wheel weight itself, is the centrifugal weight penalty by the 19" and 20" diameter. I might not wait to wear out the OEM tires, before swapping to 18's and 19's.
Safety Car
Joined: May 2000
Posts: 4,828
Likes: 357
From: Albuquerque NM
That's right. I swapped to 18" Forgedline wheels front and rear. They fit, even over CCB brakes on my Z-07. R-888R tires and these wheels are MUCH lighter than the stock wheels/tires (5 pounds each), and the weight is closer to the hub, with less centrifugal loss to accelerate and brake their mass.
