Engine Dyno Testing Major Headers Very Soon!!! :)
Thread Starter
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
Engine Dyno Testing Major Headers Very Soon!!! :)
Guys I just wanted to let you all know our goal is to dyno every product we add to our site. As a result I will be engine dyno testing every major brand of headers on the the engine dyno test LT1.
I'm waiting for all the top brands to arrive & they will all be available through our site!
I'm waiting for all the top brands to arrive & they will all be available through our site!
Thread Starter
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
I have kooks coming. I've seen them in person & they look great!
I have ARH coming. I've seen them at sema as well & they look great!
I was super excited to see the Pfadt Tri Y but it sounds like they wont make it afterall.
Any others you guys want tested let me know.
I have ARH coming. I've seen them at sema as well & they look great!
I was super excited to see the Pfadt Tri Y but it sounds like they wont make it afterall.
Any others you guys want tested let me know.
Pro
Joined: Sep 2008
Posts: 635
Likes: 0
From: NY
With the information that is available to me through the forum at this point, it would seem:
Pfadt >>> LG >> ARH > Kooks.
Would be awesome to have all 4 tested by the same guys, on the same dyno, same conditions etc.
I am sure I am not alone with this opinion
Pfadt >>> LG >> ARH > Kooks.
Would be awesome to have all 4 tested by the same guys, on the same dyno, same conditions etc.
I am sure I am not alone with this opinion
Premium Supporting Vendor
Joined: Oct 2005
Posts: 13,975
Likes: 980
From: Clinton Township MI
C7 of Year Finalist (track prepared) 2019
Thread Starter
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
The issue is he's back ordered
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Sep 2004
Posts: 7,978
Likes: 1,853
From: North/Central NJ - a.k.a. Gotti in the CFNE section
St. Jude Donor '05
Definitely get LG and PFADT... any company should specifically make these available to you if you are going to sell them.... that doesn't jive... they can get ONE set to you.. if a company thinks their product is as good or better than their competition they should be begging for a 3rd party to do something like this.
Le Mans Master
Joined: Jan 2005
Posts: 8,226
Likes: 2
From: Lake Wylie SC
Definitely get LG and PFADT... any company should specifically make these available to you if you are going to sell them.... that doesn't jive... they can get ONE set to you.. if a company thinks their product is as good or better than their competition they should be begging for a 3rd party to do something like this.
In this case you might think a little differently
Le Mans Master
Joined: Sep 2004
Posts: 7,978
Likes: 1,853
From: North/Central NJ - a.k.a. Gotti in the CFNE section
St. Jude Donor '05
What if you were one of PFADT's customers on back order who has already paid for the product only to find out while you are still waiting on them to fill their back orders they sent a set to a vendor for a shootout just to prove their product and gain more customers.
In this case you might think a little differently
In this case you might think a little differently
Thread Starter
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
Guys they've already confirmed they liked I was going to test the headers.
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
Race Director
Joined: Mar 2008
Posts: 12,413
Likes: 502
From: Rio Rancho NM
Guys they've already confirmed they liked I was going to test the headers.
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
!!! I assume stock car/tune
Le Mans Master
Joined: Jan 2005
Posts: 8,226
Likes: 2
From: Lake Wylie SC
Guys they've already confirmed they liked I was going to test the headers.
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
I explained we were testing every item we were going to sell & they were 1000% for it.
They just have to make sure they have a set building for us. We don't want any customers to get bumped, that wouldn't be fair at all!
For sure there will be pros and cons associated with each manufactures product
It will be nice to note the differences in numbers when compared with tube lengths, step designs, and diameters along with the different bends each manufacture incorporates to get the job done.
Also degree of installation difficulty and what one manufactures pipes might be in the way of as far as access to other parts needing maintenance.
Definitely subscribed
