C7 Redline
Thread Starter
Burning Brakes
Joined: Dec 2013
Posts: 972
Likes: 299
From: Sierra Vista Arizona
C7 Redline
Had the car on the Dyno today (first experience doing so) and during the run's briefly touched but did not exceed 6500 RPM...is this ill advised? i.e. is additional conservatism merited to hold RPM's at 6000 to protect the engine or is it designed to tolerate brief incursions into but not exceeding 6500?
Race Director
Joined: Jul 2007
Posts: 10,961
Likes: 2,643
From: Texas Hill Country
It won't hurt anything, there is a rev limiter. It's not advisable to hold the car on the rev limiter but running it up and letting off on the dyno is ok.
If you down shift into 2nd gear at 100 mph then you will have a problem.
If you down shift into 2nd gear at 100 mph then you will have a problem.
