Bleeding clutch slave
Thread Starter
Drifting
Joined: Dec 2015
Posts: 1,410
Likes: 414
From: Germantown Maryland
Bleeding clutch slave
I have been doing the Ranger method but want to do a real full clutch fluid replacement. I know how to do it except I don't know what all needs to be removed to access the bleed port on the slave cylinder. Anyone?
Safety Car
Joined: Dec 2012
Posts: 3,849
Likes: 1,860
From: St. Louis Metro East IL
The procedure is up in the Sticky Threads.
Procedure says to remove left cat convertor.
Here's the link:
https://www.corvetteforum.com/forums...tem-specs.html
GL,
Ron
Procedure says to remove left cat convertor.
Here's the link:
https://www.corvetteforum.com/forums...tem-specs.html
GL,
Ron
Thread Starter
Drifting
Joined: Dec 2015
Posts: 1,410
Likes: 414
From: Germantown Maryland
Thanks, Ron. I'll scope that out next time I have her back up on the QuickJack. I need to remember that Theta posted many useful how-tos that live in the sticky area.
The procedure is up in the Sticky Threads.
Procedure says to remove left cat convertor.
Here's the link:
https://www.corvetteforum.com/forums...tem-specs.html
GL,
Ron
Procedure says to remove left cat convertor.
Here's the link:
https://www.corvetteforum.com/forums...tem-specs.html
GL,
Ron
Last edited by raylo; Jul 21, 2019 at 11:29 AM.
