Seat position memory
Thread Starter
Cruising
Joined: Mar 2010
Posts: 13
Likes: 0
Seat position memory
I have a 2014 stock Stingray, where the driver's seat position memory does not work anymore. When I exit, it moves the seat/steering wheel back, and does not remember where it was when I reenter. At least when I push the #1 or #2 sear buttons, nothing happens. I have tried resetting them, but with the sale results. Any ideas of what could be tried before having to take it to the dealership?
Last edited by Stevenix1; Jan 2, 2021 at 02:49 PM. Reason: remove name from main copy
Thread Starter
Cruising
Joined: Mar 2010
Posts: 13
Likes: 0
Yes, I have reset it many times, but afterwards, when I try to push the seat button for setting #1 or #2, nothing happens. I have held the button in for several seconds, as well just clicking it once, or twice, or even 3 times. Once again, nothing happens.
Safety Car
Joined: Dec 2012
Posts: 3,826
Likes: 1,845
From: St. Louis Metro East IL
There is a limit switch on the bulkhead behind the seat that stops rearward travel. But - it also can affect seat memory recall.
Run the seat all the way back, then move forward a short amount. Set this as exit position.
Try the #1 and #2 buttons - this may have solved the problem, or reset memory positions and try again.
Depending on whether or not you are in park / brake set you may have to hold the button until the seat has traveled all the way.
See this:
https://www.corvetteactioncenter.com...tics-1299.html
GL
Ron
Run the seat all the way back, then move forward a short amount. Set this as exit position.
Try the #1 and #2 buttons - this may have solved the problem, or reset memory positions and try again.
Depending on whether or not you are in park / brake set you may have to hold the button until the seat has traveled all the way.
See this:
https://www.corvetteactioncenter.com...tics-1299.html
GL
Ron
Safety Car
Joined: Mar 2018
Posts: 4,754
Likes: 1,650
