Signature Wheel/Deity Motorsports pictures and sale thread!!!!!!!
#261
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Bumper back on... almost ready
Attachment 48354264
Attachment 48354264
Last edited by Deity.Motorsports; 02-20-2018 at 12:11 PM.
#264
Melting Slicks
Do i want 18's, 19's, or a stock 19/20 setup...that is the question. I see there's a bit of a sale on a set of 18's if im seeing it right. 😎. It's hard trying to figure out all the best tire setups.
#267
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Repeat customer, one of my first in this board, on his show 20/21 Signature Two. He has SV103 for drag package.
Attachment 48354193
Attachment 48354193
#269
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Sticks really well without much warming up. My traction control rarely kicks in now. Cup 2 used to be so bad until the tires got some decent heat in them.
#270
The following users liked this post:
Deity.Motorsports (03-01-2018)
#271
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
#272
Burning Brakes
Forget the wing.
Hopefully you can do an aesthetically pleasing front bumper that will also allow dual intercoolers to sit behind them down the road (should people want to retrofit ZR1 coolers or aftermarket).
Here's one for inspiration -
Hopefully you can do an aesthetically pleasing front bumper that will also allow dual intercoolers to sit behind them down the road (should people want to retrofit ZR1 coolers or aftermarket).
Here's one for inspiration -
#273
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
My quick rendering with phone app. Will utilize ZR1 coolers on the side and center, or similar type.
Last edited by Deity.Motorsports; 03-01-2018 at 10:02 AM.
#274
Burning Brakes
I may as well let the cat out of the bag. Project starting next week. Stage 3 with 1” more aggressive will be build into the bumper to cut overall cost on customers.
My quick rendering with phone app. Will utilize ZR1 coolers on the side and center, or similar type.
My quick rendering with phone app. Will utilize ZR1 coolers on the side and center, or similar type.
The front holes are too big no? (Famous last words )
#275
Reminds me of a wide mouth bass; this and the ZR1.
#278
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Because I don't think it's that good looking. How is my rendering not purposeful? Two side intake for coolers and one lower intake for a flat long cooler. Just like the picture you posted but without breaking up the front bumper into so may pockets. One large opening that's divided into usable sections. To me, it's an evolution of the Z06 with one large opening. Just enlarged slightly larger for more coolers.
#279
Drifting
I may as well let the cat out of the bag. Project starting next week. Stage 3 with 1” more aggressive will be build into the bumper to cut overall cost on customers.
My quick rendering with phone app. Will utilize ZR1 coolers on the side and center, or similar type.
My quick rendering with phone app. Will utilize ZR1 coolers on the side and center, or similar type.