Wild caught......not in its natural habitat!
#21
#22
Race Director
Sorry. Haven't seen that in all the C8s (15 or more so far) I've sat in and looked at up close.
Maybe the production cars will have.. but what's out there now looks the same as all other C6 C7s imo.. especially the door handles not lining up to the quarter panel duct. It drives me mad.
Maybe the production cars will have.. but what's out there now looks the same as all other C6 C7s imo.. especially the door handles not lining up to the quarter panel duct. It drives me mad.
Last edited by 23/C8Z; 09-05-2019 at 04:08 PM.
The following users liked this post:
JABCAT (09-05-2019)
#23
My new plant 18 has excellently aligned panels everywhere in addition to far less OP. My '14 was as good as they came then, but the difference in fit and finish was obvious when inspected side-by-side.
Last edited by Foosh; 09-05-2019 at 04:18 PM.
#24
Sorry. Haven't seen that in all the C8s (15 or more so far) I've sat in and looked at up close.
Maybe the production cars will have.. but what's out there now looks the same as all other C6 C7s imo.. especially the door handles not lining up to the quarter panel duct. It drives me mad.
Maybe the production cars will have.. but what's out there now looks the same as all other C6 C7s imo.. especially the door handles not lining up to the quarter panel duct. It drives me mad.
https://www.corvetteforum.com/forums...post1600060952
LOL, C7s from the new plant have been a lot better. It's a lot more than just paint jobs with fancy new equipment. One of the reasons the new plant is so enormous is that the process of curing the panels has changed, and they now travel longer distances, spending more time in cooler ovens. The reason that was done was to fix the issue of panel warpage.
My new plant 18 has excellently aligned panels everywhere in addition to far less OP. My '14 was as good as they came then, but the difference in fit and finish was obvious when inspected side-by-side.
My new plant 18 has excellently aligned panels everywhere in addition to far less OP. My '14 was as good as they came then, but the difference in fit and finish was obvious when inspected side-by-side.
#26
Le Mans Master
[QUOTE=NoSoupForU;1600101300]Those wheels are hideous...
of course they are. They’re black
of course they are. They’re black
#27
Drifting
I really like the look with no emblems. Wonder if the emblems mount with tape only, no holes? My C5 had tape only on the rear deck emblem so I took it off. The front has two pins thru mounting holes.
#29
Le Mans Master
Member Since: Dec 1999
Location: One Hour From Boston!
Posts: 6,408
Received 4,684 Likes
on
1,862 Posts
The following users liked this post:
Malum1 (09-05-2019)
#30
Le Mans Master
Member Since: Aug 2018
Location: South Hill Wa
Posts: 7,035
Received 4,216 Likes
on
1,964 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
#31
Racer
There’s a demo in the tri cities area in February.
Last edited by zr_kaizen; 09-05-2019 at 06:29 PM.
The following users liked this post:
Mr. Black (09-05-2019)
#33
There will be one at the Pasco dealer on February 10th. I may drive up to check it out if weather isn’t to bad.
The following users liked this post:
Mr. Black (09-05-2019)
#34
Le Mans Master
Member Since: Aug 2018
Location: South Hill Wa
Posts: 7,035
Received 4,216 Likes
on
1,964 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
Thanks guys. Depending on the pass conditions over White Pass we might have to bomb over and check it out in person. That would be really cool.
#35
It's simply ugly...has nothing to do with buying it or not...there's quite a few thing i don't like about the car but nothing that would stop me from not buying two of them...one for me and one for my son...and when the GS comes out I'll buy two more...when the ZO6 comes out I'll probably have to by three one for me my son and one for my daughter and all the while hating the rear end...but I usually dont have to worry about that aspect on the track because I'm planning on viewing two of my three C8's from the rearview mirror...but by then I'm sure GM will get a clue!
#36
Safety Car
I named my C5Z06 "Big Butt." Named the C6Z06 "Bigger Butt." Didn't name the C7Z as it was slightly better than the C6Z. But the C8 rear is totally hideous. I am a golfer but my golf clubs are stored at the Club. I would be totally happy forgetting about ever getting a set of clubs in the Corvette if it would help them fix the rear end look problem.
Last edited by pkincy; 09-05-2019 at 08:49 PM.
The following users liked this post:
JABCAT (09-06-2019)
#37
Le Mans Master
Member Since: Aug 2018
Location: South Hill Wa
Posts: 7,035
Received 4,216 Likes
on
1,964 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
It's simply ugly...has nothing to do with buying it or not...there's quite a few thing i don't like about the car but nothing that would stop me from not buying two of them...one for me and one for my son...and when the GS comes out I'll buy two more...when the ZO6 comes out I'll probably have to by three one for me my son and one for my daughter and all the while hating the rear end...but I usually dont have to worry about that aspect on the track because I'm planning on viewing two of my three C8's from the rearview mirror...but by then I'm sure GM will get a clue!
#38
Le Mans Master
#39
I dig the C8. The back in all the pics don’t look good at all. Very busy and doesn’t flow. Hopefully they’ll change that in a future model year like the clay model showing up in pics
#40