C8 must return to ORIGINAL design. AT LEAST ZO6 deletes tacked-on scoop +Front bloat
#1
Instructor
Thread Starter
C8 must return to ORIGINAL design. AT LEAST ZO6 deletes tacked-on scoop +Front bloat
The C8 needs to return to this, it's ORIGINAL design.
Worst case scenario. all the performance models (ZO6, ZORA, etc) need to return to this design.
-Without the side intakes receiving the addition of tacked on plastic (black "scar")
-Without the bloated front end that negatively affects both the visibility and sleek taut design
I originally posted for reference a collage of 4 pics, but I think they will only confuse people, so I removed it..
Notice on the collage featuring four different designs, it show how, over time, the side intakes receive the addition of the tacked-on plastic side scoops, and the font end gets bloated.
Notice how the front end gets bloated, decreasing front visibility, and the original sleek, taut front end.
Disclaimer: Long time new Corvette buyer over 4 generations, C8 order reserved, no other car is better or more reliable, Corvette's incredible value is just an additional bonus.
Here are example of clean, taut side intakes, integrated into the design, without plastic tacked on as an after-thought
Worst case scenario. all the performance models (ZO6, ZORA, etc) need to return to this design.
-Without the side intakes receiving the addition of tacked on plastic (black "scar")
-Without the bloated front end that negatively affects both the visibility and sleek taut design
I originally posted for reference a collage of 4 pics, but I think they will only confuse people, so I removed it..
Notice on the collage featuring four different designs, it show how, over time, the side intakes receive the addition of the tacked-on plastic side scoops, and the font end gets bloated.
Notice how the front end gets bloated, decreasing front visibility, and the original sleek, taut front end.
Disclaimer: Long time new Corvette buyer over 4 generations, C8 order reserved, no other car is better or more reliable, Corvette's incredible value is just an additional bonus.
Here are example of clean, taut side intakes, integrated into the design, without plastic tacked on as an after-thought
Last edited by 22c8zo6; 01-04-2021 at 06:18 PM.
The following 5 users liked this post by 22c8zo6:
DNAST1 (01-05-2021),
Malekith (01-05-2021),
Me Hole (01-06-2021),
thatsmydog (01-05-2021),
traind (01-05-2021)
Popular Reply
01-04-2021, 04:51 PM
Moderator
It's not happening.
#2
Moderator
It's not happening.
The following 19 users liked this post by Zymurgy:
68roadster (01-05-2021),
ATC399 (01-04-2021),
BIG Dave (01-04-2021),
Corvette ED (01-05-2021),
EasyLivin (01-04-2021),
and 14 others liked this post.
#3
Le Mans Master
Early design renditions often do not taken to account many necessary items that are found along the way to development. Cooling is one major concern on the new design. Then someone menttions the need more luggage room.another wants a visible engine. yet another designer insists on a bigger tire,,,the list goes on until a final decision is made.
The following 5 users liked this post by Phanni:
CorvettoBrando (01-07-2021),
Kappa (01-07-2021),
maverickster (01-12-2021),
thatsmydog (01-05-2021),
traind (01-05-2021)
#4
The C8 needs to return to this design.
Worst case scenario. all the performance models (ZO6, ZORA, etc) need to return to this design.
-Without the side intakes receiving the addition of tacked on plastic (black "scar")
-Without the bloated front end that negatively affects both the visibility and sleek taut design
Disclaimer: Long time new Corvette buyer over 4 generations, C8 order reserved, no other car is better or more reliable, Corvette's incredible value is just an additional bonus.
Worst case scenario. all the performance models (ZO6, ZORA, etc) need to return to this design.
-Without the side intakes receiving the addition of tacked on plastic (black "scar")
-Without the bloated front end that negatively affects both the visibility and sleek taut design
Disclaimer: Long time new Corvette buyer over 4 generations, C8 order reserved, no other car is better or more reliable, Corvette's incredible value is just an additional bonus.
Last edited by Panfish; 01-04-2021 at 05:13 PM.
#5
Instructor
Thread Starter
Maybe.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive an update/improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive an update/improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
Last edited by 22c8zo6; 01-04-2021 at 05:08 PM.
#6
Race Director
Member Since: Aug 2019
Location: Central Illinois
Posts: 10,077
Received 11,610 Likes
on
4,640 Posts
Maybe.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive and update/ improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive and update/ improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
The following 7 users liked this post by Phil1098:
Corvette ED (01-05-2021),
Kappa (01-07-2021),
keagan (01-04-2021),
khartford (01-04-2021),
WMallocation (01-04-2021),
and 2 others liked this post.
#7
Moderator
I think it looks just fine the way it is. I like the carbon flash metallic black accents.
The following 18 users liked this post by Zymurgy:
BIG Dave (01-04-2021),
capkarl (01-08-2021),
carriccp (01-05-2021),
Corvette ED (01-05-2021),
DJGold (01-04-2021),
and 13 others liked this post.
#8
Instructor
Thread Starter
It's painfully obvious, if you only look at the top left image.
I removed the collage of 4 different designs together, because I think it's going to confuse people.
I removed the collage of 4 different designs together, because I think it's going to confuse people.
Last edited by 22c8zo6; 01-04-2021 at 05:22 PM.
#9
Instructor
Thread Starter
But, if the ZO6 returned to the original design without that tacked on plastic scoops,
I guarantee that no one would be calling for the black plastic to be added to the ZO6.
I'd bet my very life on that.
#10
Le Mans Master
Member Since: Jan 2016
Location: New Mexico
Posts: 8,055
Received 2,684 Likes
on
1,408 Posts
2018 C6 of Year Finalist
The following users liked this post:
ZishanM (01-05-2021)
#11
Instructor
Thread Starter
Um, you're along for the ride, you'll get what they make. If you don't like the way it looks then don't buy it. They aren't coming here for design help or insight. Why not take a poll on how many want the rear trunk on a C8, when you find out it's split down the middle, you'll realize they can't please everyone. It's fun winter time sport to speculate, but we are all just pawns on the chess board.
Especially in consideration of the fact GM made early and often design changes to the 6th Gen Camaro, which I posted for reference.
The following users liked this post:
traind (01-05-2021)
#12
Maybe.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive an update/improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
But, who agrees that original intake looks like a work of art, and not tacked on as an afterthought?
The performance models have different body work, so couldn't they receive an update/improvement, in a return to the original design?
If you disagree, just look at all design changes that were made early and often to the 6th Gen Camaro by GM.
The following users liked this post:
skank (01-08-2021)
#13
I think that front overhang looks way too long, production proportions are better. I can see why some people would want to remove the carbon flash side intakes, but I kinda like the carbon flash. This design reminds me of the C5 side vent flipped and reversed. I guess if you want to replicate this your only choice is to get the body color accents and always stay 20 feet from the car.
The following 2 users liked this post by aetepi:
ArmchairArchitect (01-06-2021),
capkarl (01-08-2021)
#15
Um, you're along for the ride, you'll get what they make. If you don't like the way it looks then don't buy it. They aren't coming here for design help or insight. Why not take a poll on how many want the rear trunk on a C8, when you find out it's split down the middle, you'll realize they can't please everyone. It's fun winter time sport to speculate, but we are all just pawns on the chess board.
Lol @ changing the gameplan when its been a success so far.
The following users liked this post:
CorvettoBrando (01-07-2021)
#16
Race Director
Member Since: Aug 2019
Location: Central Illinois
Posts: 10,077
Received 11,610 Likes
on
4,640 Posts
The following 5 users liked this post by Phil1098:
Kappa (01-07-2021),
rb185afm (01-06-2021),
Red Mist Rulz (01-05-2021),
Steve Snake Driver (01-05-2021),
Z0HS1CK (01-04-2021)
#17
Instructor
Thread Starter
My response was steeped in reality. If you don't buy a Z06, irrespective of your opinion of its looks, they'll sell every one of them and as a manufacturer that's all they really care about. I know it hurts when you first find out you don't matter, but it gets better with time.
The same usual suspects from the peanut gallery.
I remember hearing the same garbage being hurled at Corvette owners who were simply asking for the option of a DCT. How did that turn out, and what are those hecklers saying today?
Last edited by 22c8zo6; 01-04-2021 at 05:38 PM.
The following users liked this post:
traind (01-05-2021)
#18
Race Director
Member Since: Aug 2019
Location: Central Illinois
Posts: 10,077
Received 11,610 Likes
on
4,640 Posts
Really??? Show me how a GM mass produced car changed it's design based on what you thought. I'll wait right here. Please provide all the history and facts of getting things changed to suit you. Talk about living in denial.
The following 5 users liked this post by Phil1098:
Corvette ED (01-05-2021),
Kappa (01-07-2021),
khartford (01-04-2021),
vetteman41960 (01-04-2021),
Z0HS1CK (01-04-2021)
#19
Instructor
Thread Starter
It was even spelled out, just for you.
Why don't you go research the 6th Gen Camaro and learn how early and often the design was changed AFTER sales began.
The following users liked this post:
ZRacerLE (01-05-2021)
#20
Instructor
Thread Starter
A good design does not require tacked on black plastic, or font cameras........
The C8 originally has a great design.
It should return to it.
It's possible, and there is history of GM doing exactly that.
WORST CASE scenario, at least the ZO6 and performance models that require different bodywork anyway, should return to the original design.