parts list
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Instructor
Joined: Jul 2019
Posts: 159
Likes: 92
I'm curious to see what you get. Most of the underbody plastic panels are called air deflectors so its hard to say what exactly is included in that part number as there is no illustrated diagram for it. Also the z06 has different underbody paneling and you will have to add mounting holes to the base c8 panels, some parts of the strake may bolt on though.
Thread Starter
Melting Slicks
Joined: Feb 2000
Posts: 3,426
Likes: 568
From: new orleans
gm canceled the order. they said its on national back order..... If they can't put out minor stuff like this, how are they going to have a stingray, Z06 and E-ray on the same line.....
Instructor
Joined: Jan 2020
Posts: 200
Likes: 246
It is likely on national control and you’d need a vin number to order. They’re building cars first.
Thread Starter
Melting Slicks
Joined: Feb 2000
Posts: 3,426
Likes: 568
From: new orleans
Instructor
Joined: Jan 2020
Posts: 200
Likes: 246
Did you order it online or at a physical dealer?
All I’m seeing is that it is on back order with no ETA. It doesn’t appear to be controlled, so they could have left it on order and you would have gotten it eventually.
Are you trying to fit this to a base C8?
All I’m seeing is that it is on back order with no ETA. It doesn’t appear to be controlled, so they could have left it on order and you would have gotten it eventually.
Are you trying to fit this to a base C8?
