Scanners/Clearing codes "Tech guys"
Thread Starter
Drifting
Joined: Nov 2006
Posts: 1,713
Likes: 218
From: NY
Scanners/Clearing codes "Tech guys"
I have question for the tech guys here, I just changed seatbelts in my C8Z. Even though I had the battery disconnected, when I reconnected I threw a "service restraint system" warning on my dashboard. Does the basic Amazon scan tool have the ability to clear this code? THANK YOU!
Instructor
Joined: Dec 2021
Posts: 234
Likes: 147
I have question for the tech guys here, I just changed seatbelts in my C8Z. Even though I had the battery disconnected, when I reconnected I threw a "service restraint system" warning on my dashboard. Does the basic Amazon scan tool have the ability to clear this code? THANK YOU!
also try leaving the battery disconnected overnight and see if it clears
Burning Brakes
Joined: May 2023
Posts: 1,034
Likes: 370
From: Ontario
If it doesn't affect start/run operation, try driving it a few miles, stop, turn off, rest, then start, drive a few miles, rinse, repeat.
Sometimes the CEL will clear when it "learns" the problem has been resolved (belt replaced/functional).
Sometimes the CEL will clear when it "learns" the problem has been resolved (belt replaced/functional).
