When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm sure this has been covered (likely a lot) but in scanning the forum this morning I didn't quite find what I was looking for. I think there have been more than a hundred threads created or updated in the last 24 hours so it feels a bit like trying to find the proverbial needle in a haystack. Basically, looking to find any renders or uncovered pictures of upcoming models that show what they will look like (theoretically).
Here is the best render I have seen thus far which I believe to be the most accurate:
I don't think the wing will look like the above rendering, and the wheels are a little different as well, but overall, I think this is the best I have seen.
I think we're going to be pretty close on the front and sizes, but it's looking more like there's going to get a center exhaust and a crazy-high wing spoiler option. Cheers.
Here is the best render I have seen thus far which I believe to be the most accurate:
I don't think the wing will look like the above rendering, and the wheels are a little different as well, but overall, I think this is the best I have seen.
Here is the best render I have seen thus far which I believe to be the most accurate:
I don't think the wing will look like the above rendering, and the wheels are a little different as well, but overall, I think this is the best I have seen.
Please be this. I know that's not the wing we've seen, but I'd take a GT4 sized wing like that for time trials.
I think we're going to be pretty close on the front and sizes, but it's looking more like there's going to get a center exhaust and a crazy-high wing spoiler option. Cheers.
One of the best renders by far.
That one, and that orange one with the gigantic wheels C&D used a lot in their C8Z articles lol
Here is the best render I have seen thus far which I believe to be the most accurate:
I don't think the wing will look like the above rendering, and the wheels are a little different as well, but overall, I think this is the best I have seen.
That is too over exaggerated. It will have the side boomerang like this but the widebody is too wide. I also think the canards will be for Z07 package. The render below this one is probably better proportions of what will come
There’s some shenanigans going on under the hood of the frunk, that part has been quite heavily padded on all the Z06 prototypes and remains so.
None of the artist’s renditions capture this.
Maybe I’m wrong, just a hunch.
There’s some shenanigans going on under the hood of the frunk, that part has been quite heavily padded on all the Z06 prototypes and remains so.
None of the artist’s renditions capture this.
Maybe I’m wrong, just a hunch.
Its the same padding the C8 Stingrays had. Pretty sure they are just using the exact same covers.
The yellow and orange car and driver renders look fantastic and I believe are very close. Like Atari mentioned we need a render thread, the stingray had hundreds of renders before the reveal and some were accurate. The Z06 has even more hype surrounding it and we have only 10 renders, pathetic. We know what 2 sets of wheels are going to look like so render those along with car and drivers renders and post all the colors and even colors that aren't available like some bright Lambo/McLaren greens.
Bottom line, it needs to be low, or at least lower than the c8 and at least 2.5 inches wider in the rear... a car can be low and still function on the street day to day, it’s all in the design, just like the renders. Fill up the wheel wells, keep the distance from the top of the tires to the bottom of the fenders a minimal distance. My CT6 V is a prime example, large 4 door cruiser with an outstanding low stance.
The yellow and orange car and driver renders look fantastic and I believe are very close. Like Atari mentioned we need a render thread, the stingray had hundreds of renders before the reveal and some were accurate. The Z06 has even more hype surrounding it and we have only 10 renders, pathetic. We know what 2 sets of wheels are going to look like so render those along with car and drivers renders and post all the colors and even colors that aren't available like some bright Lambo/McLaren greens.
Learn to draw, we eagerly await your ‘art’ in the new renderings thread. 🙄
Here's my favorite. Very similar to the above. This one's a C8R Photoshop.
I like this one and the orange one, but there is absolutely ZERO chance of the front fender flare just bluntly stopping half way down behind the front wheel. Yes, the C8R has this, but it is a race car and can get away with it because they are not concerned about road debris kicking up and damaging the paint on the side of the body. Sorry guys, this aint it...
Can We Get a Render?
