Engine Analyzer please !?!
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Engine Analyzer please !?!
I ran this in Desk Top Dyno and want to get a comparative number from something OTHER than Desk Top Dyno, can someone run this for me please? I would greatly appreacite it!
406 CI
3.75 crank
4.155 bore
.027 Head gasket -Cometic
4.165 Bore head gasket
Piston -6CC
.015 to .020 in hole (piston rock)
AFR 210 Race Ready heads 68 CC's
1.6 Roller Rockers
233/233 @ / .050 Roller cam (custom grind)
284/289 Advertised Duration
.576/.576 lift (.360/.360) lobe
112-LS , Intake Lobe 108 CL
TPIS Miniram
58 MM BBK/TB
30 # SVO Injectors
Hooker 1-3/4 longtube # 2151-1
[Modified by ld85, 5:56 PM 1/10/2004]
406 CI
3.75 crank
4.155 bore
.027 Head gasket -Cometic
4.165 Bore head gasket
Piston -6CC
.015 to .020 in hole (piston rock)
AFR 210 Race Ready heads 68 CC's
1.6 Roller Rockers
233/233 @ / .050 Roller cam (custom grind)
284/289 Advertised Duration
.576/.576 lift (.360/.360) lobe
112-LS , Intake Lobe 108 CL
TPIS Miniram
58 MM BBK/TB
30 # SVO Injectors
Hooker 1-3/4 longtube # 2151-1
[Modified by ld85, 5:56 PM 1/10/2004]
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Re: Engine Analyzer please !?! (89gta383)
Hooker 1-3/4 into 3" collector and out a 3" Hooker Y- pipe, into a 3 inch diameter pipe to the factory dual exhaust and out a pair of Dynomax Super Turbo mufflers
