Problem with sig.
Thread Starter
Melting Slicks
Joined: May 2004
Posts: 2,856
Likes: 187
From: Earth
Problem with sig.
I will attach my sig. at the end but my question is...
1. I can't attach a LPE logo as I have seen on others sig's. I have tried but it won't let me.
2. Looking at my sig. is this the largest it can be..I have even deleted some facts about my car in order for it to fit. Is there a limit on the size?
Thanks in advance.
1. I can't attach a LPE logo as I have seen on others sig's. I have tried but it won't let me.
2. Looking at my sig. is this the largest it can be..I have even deleted some facts about my car in order for it to fit. Is there a limit on the size?
Thanks in advance.
Team Owner
Joined: Jun 2001
Posts: 24,921
Likes: 0
From: Knoxville, TN
CI 3-4-5-6-7-8 Veteran
St. Jude '03 thru '26
Thread Starter
Melting Slicks
Joined: May 2004
Posts: 2,856
Likes: 187
From: Earth
Ok, tried that and didn't work.
I PUT THE BANNER HERE THEN WHATS BELOW
1989 LPE 383
Fully ported alum. heads,stainless steel 2.00/1.56 severe duty valves,tpi valve springs, titanium retainer,forged speed pro pistons, 10.5:1 callies steel crank, 6.75" Dia. harmonic balancer,Hyd roller block,Superram plenum runner kit,Superram base,58mm throttle body,Hyd roller Tpi camshaft 219/219@50, 1.6 ratio stainless steel roller rocker arms,plasma moly speed pro rings,Hyd roller lifters,Hurst Line Loc
Best run: 11.85@119.65mph
http://temp.corvetteforum.net/c4/snakecharmer
and it still didn't work.
I PUT THE BANNER HERE THEN WHATS BELOW
1989 LPE 383
Fully ported alum. heads,stainless steel 2.00/1.56 severe duty valves,tpi valve springs, titanium retainer,forged speed pro pistons, 10.5:1 callies steel crank, 6.75" Dia. harmonic balancer,Hyd roller block,Superram plenum runner kit,Superram base,58mm throttle body,Hyd roller Tpi camshaft 219/219@50, 1.6 ratio stainless steel roller rocker arms,plasma moly speed pro rings,Hyd roller lifters,Hurst Line Loc
Best run: 11.85@119.65mph
http://temp.corvetteforum.net/c4/snakecharmer
and it still didn't work.
Team Owner
Joined: Jun 2001
Posts: 24,921
Likes: 0
From: Knoxville, TN
CI 3-4-5-6-7-8 Veteran
St. Jude '03 thru '26
You should have been able to put what you want in your previous post so I can see what you are trying to do. Go ahead and put your banner in so I know what you want your sig to look like.
Thread Starter
Melting Slicks
Joined: May 2004
Posts: 2,856
Likes: 187
From: Earth
1989 LPE 383
Fully ported alum. heads,stainless steel 2.00/1.56 severe duty valves,tpi valve springs, titanium retainer,forged speed pro pistons, 10.5:1 callies steel crank, 6.75" Dia. harmonic balancer,Hyd roller block,Superram plenum runner kit,Superram base,58mm throttle body,Hyd roller Tpi camshaft 219/219@50, 1.6 ratio stainless steel roller rocker arms,plasma moly speed pro rings,Hyd roller lifters,Hurst Line Loc,LPE 1 5/8 stainless steel headers, Forced Air Induction,MSD 6AL
Best run: 11.85@119.65mph
Best 60' 1.70
http://temp.corvetteforum.net/c4/snakecharmer
Last edited by Snakecharmer383; Aug 16, 2008 at 11:46 PM.
Thread Starter
Melting Slicks
Joined: May 2004
Posts: 2,856
Likes: 187
From: Earth
Thanks! I love it!
Why your reading this, I'm having problems embedding video in my threads..could it be something with my settings? I'm copy and pasting the code as it says..I click on the button to "insert link" then paste code in there.
P.S. How did you fix the sig. so I know for future changes?
Why your reading this, I'm having problems embedding video in my threads..could it be something with my settings? I'm copy and pasting the code as it says..I click on the button to "insert link" then paste code in there.
P.S. How did you fix the sig. so I know for future changes?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jun 2001
Posts: 24,921
Likes: 0
From: Knoxville, TN
CI 3-4-5-6-7-8 Veteran
St. Jude '03 thru '26
Thanks! I love it!
Why your reading this, I'm having problems embedding video in my threads..could it be something with my settings? I'm copy and pasting the code as it says..I click on the button to "insert link" then paste code in there.
P.S. How did you fix the sig. so I know for future changes?
Why your reading this, I'm having problems embedding video in my threads..could it be something with my settings? I'm copy and pasting the code as it says..I click on the button to "insert link" then paste code in there.
P.S. How did you fix the sig. so I know for future changes?
Otherwise, you should be able to post any link to a video that allows the linking. There is a thread in the TESTING Section that has some youtube assistance (if search works there).
I just edited your signature and put the image in. I don't know if I could do it being a moderator and go over the 500 char limit or if it was because I was doing it from the moderator control panel.