When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
I just got a zr1 spoiler to go on my 2007 c6 base model and was wondering how to install it. It seems like its not wide enough. I cant seem to find a video or instructions on how to install it.
For the front splitter I just lined up the ends with the front of the wheel openings on the fenders while supporting the center with a box. When the ends of the splitter are flush with the fender openings secure both ends with self tapping screws then raise the center of the splitter into position and secure that with a screw then work your way around from the center to each end with more screws.
Here's how it should look when mounted properly.
I just got a zr1 spoiler to go on my 2007 c6 base model and was wondering how to install it. It seems like its not wide enough. I cant seem to find a video or instructions on how to install it.
IIRC you have to buy a specific ZR1 clone splitter for the base model, as the front bumpers are different. Could this be the issue?
Last edited by Dan_the_C5_Man; Apr 25, 2018 at 09:05 PM.
I just got a zr1 spoiler to go on my 2007 c6 base model and was wondering how to install it. It seems like its not wide enough. I cant seem to find a video or instructions on how to install it.
If you are in fact, asking about the splitter, the ZR1 splitter is not compatible with the base C6.
Last edited by Larry Myers; Apr 25, 2018 at 05:03 PM.
It's actually a splitter. I was in the middle of messing with my spoiler while I was typing. But I bought this and in the description it says it was for base models. EVRose I'll try your idea and let you know. Thanks for the replys
Zr1 front splitter
