CorvetteForum - Chevrolet Corvette Forum Discussion
Bad picture of stock
Bad picture of stock
0 2025/09/23 06:09:13
Another bad pic
Another bad pic
0 2025/09/23 06:09:28
So, I am different!!!
So, I am different!!!
0 2025/10/13 06:08:56
Of course it has to have gas in to pump gas out.
Of course it has to have gas in to pump gas out.
0 2025/10/13 18:53:06
Missing the beveled washer and cotter pin almost broken thru.
Missing the beveled washer and cotter pin almost broken thru.
0 2025/10/26 12:06:28
The eyebolt installation screw driver tip works good for installing Jesus clips.
The eyebolt installation screw driver tip works good for installing Jesus clips.
0 2025/10/26 12:06:53
It has worked well for over 30 years on the rocker panels of the 68RS
It has worked well for over 30 years on the rocker panels of the 68RS
0 2025/10/31 05:33:40
The coiled wire is the rheostat or variable resistor.
The coiled wire is the rheostat or variable resistor.
0 2025/10/31 08:51:09
0 2025/10/31 08:51:23
0 2025/10/31 08:51:35
0 2025/11/19 05:21:25
Top Up for the Winter Nap.
Top Up for the Winter Nap.
0 2025/11/20 05:40:34
Driver's side shows fresh air pipe to bottom of air cleaner housing
Driver's side shows fresh air pipe to bottom of air cleaner housing
0 2025/11/23 18:11:52
Passenger's side for PCV valve and hose routing. You can also see the coil at the left hand side of the picture.
Passenger's side for PCV valve and hose routing. You can also see the coil at the left hand side of the picture.
0 2025/11/23 18:12:05
Do you want some? It works.
Do you want some? It works.
0 2025/11/27 13:35:24
66 hub cap assumed to be the same as 65
66 hub cap assumed to be the same as 65
0 2025/11/29 04:15:28
0 2025/11/29 04:15:45
0 2025/11/29 12:52:52
0 2025/11/29 17:48:30
Inside of the cap R terminal on the right but on the left when installed on the solenoid.
Inside of the cap R terminal on the right but on the left when installed on the solenoid.
0 2025/11/29 17:48:55
Stock bracket at front of intake and double spring. Added a short connector at the throttle lever to reduce the spring pressure just a bit. Not NCRS, but neither is the owner.
Stock bracket at front of intake and double spring. Added a short connector at the throttle lever to reduce the spring pressure just a bit. Not NCRS, but neither is the owner.
0 2025/12/01 06:11:18
0 2025/12/01 18:10:14
0 2025/12/01 18:10:32
0 2025/12/09 16:20:43
0 2025/12/09 16:21:03
0 2025/12/09 16:21:18
Contacts inside the cap become pitted, but the large contact can be rotated 180 degrees or burnished.
Contacts inside the cap become pitted, but the large contact can be rotated 180 degrees or burnished.
0 2025/12/15 03:59:59
The contact washer can be burnished to remove the pitting or some can be flipped.
The contact washer can be burnished to remove the pitting or some can be flipped.
0 2025/12/15 04:02:26
The main contact in the cap can be burnished or turned 180 degrees to provide a new surface if pitted.
The main contact in the cap can be burnished or turned 180 degrees to provide a new surface if pitted.
0 2025/12/15 04:02:42
0 2025/12/15 09:01:56
0 2025/12/27 09:32:32
The cloudy area is the feathering of the flash chrome.
The cloudy area is the feathering of the flash chrome.
0 2025/12/27 11:30:23
0 2025/12/28 10:11:16
Not pretty, but functional and removable.
Not pretty, but functional and removable.
0 2026/01/07 14:43:49
Aluminum bracket friction fit around the vent wing frame.
Aluminum bracket friction fit around the vent wing frame.
0 2026/01/07 14:44:08
Sorry about the orientation: Setting in the driver's seat easy to view the mirror thru the wing open or closed.
Sorry about the orientation: Setting in the driver's seat easy to view the mirror thru the wing open or closed.
0 2026/01/07 14:44:26
Wing fully open - 1/4" clearance
Wing fully open - 1/4" clearance
0 2026/01/07 18:14:30
In driver's seat with wing fully open. It does cut off the view in the lower corner of the mirror
In driver's seat with wing fully open. It does cut off the view in the lower corner of the mirror
0 2026/01/07 18:15:17
I pop riveted the mirror bracket on after determining the location. It will vary with different mirror bases
I pop riveted the mirror bracket on after determining the location. It will vary with different mirror bases
0 2026/01/08 07:09:38
This shows the tab which fits in the weather stripping around the vent window
This shows the tab which fits in the weather stripping around the vent window
0 2026/01/08 07:09:58