Removing stock Bose causes DIC code??
Thread Starter
Melting Slicks
Joined: Nov 2007
Posts: 2,780
Likes: 934
From: Indianapolis IN
Removing stock Bose causes DIC code??
Getting ready to remove the entire stock Bose system from my 2002 C5Z. I believe it is integrated into the vehicles computer system somehow with the memory presets, etc.?? If so, after I unplug all the plugs on the backside of the stock headunit to remove it, will this cause the DIC to display a constant code after I complete the installation of my aftermarket system or does the computer not care if the bose headunit is plugged in or not.?? If so, is there a way to "disable" this code causing condition? Thanks in advance. Still trying to learn everyhting about this "new" car.
Drifting
Joined: Jul 2005
Posts: 1,484
Likes: 27
From: Torrance Calif
I just picked up all the wiring adapters.
I am doing the same project.
Don't know about getting a DIC code, but these are supposed to be the ticket.
PAC OEM-1
PAC AMP-VET1
PAC RAD-UNV
I don't know if I will have to use all three (I was told I would), but I didn't want to get stuck.
(UPDATE) Well right off it looks like I don't need the OEM-1
I replaced the speakers and I am adding an amp.
I am doing the same project.
Don't know about getting a DIC code, but these are supposed to be the ticket.
PAC OEM-1
PAC AMP-VET1
PAC RAD-UNV
I don't know if I will have to use all three (I was told I would), but I didn't want to get stuck.
(UPDATE) Well right off it looks like I don't need the OEM-1
I replaced the speakers and I am adding an amp.
Last edited by heavymetals; Jan 7, 2008 at 09:16 PM.
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
