Sidepipe header question..????
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
Sidepipe header question..????
What is the brand name of headers that come off the heads,and turn out,then stop?I've seen them,but ????????
These are going on a BB 68 roadster,and going into custom 4" side tubes.Trying to get away from the Hooker look,and going more full fledge road race look.Anyone have some good photos as to how you came off the header,and had clearance coming under the frame,then turning into the side tubes?????Or a good source????I can fab most this,but am looking for pics.Thanks Fellas......
These are going on a BB 68 roadster,and going into custom 4" side tubes.Trying to get away from the Hooker look,and going more full fledge road race look.Anyone have some good photos as to how you came off the header,and had clearance coming under the frame,then turning into the side tubes?????Or a good source????I can fab most this,but am looking for pics.Thanks Fellas......
Le Mans Master
Joined: Oct 2005
Posts: 9,429
Likes: 44
From: Macon, GA
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
I'm afraid that they won't clear the frame.The ones that I seen were on ebay,and came back like stock exhaust manifolds,then turned out to a collector flange.??????That's what I am after,and I haven't seen them since.
Thank you for the link!Did you end up saling,or keeping the 68?????
Happy New Year's to you.....
Thank you for the link!Did you end up saling,or keeping the 68?????
Happy New Year's to you.....
Melting Slicks
Joined: Jun 2003
Posts: 2,802
Likes: 241
From: Niles, MI
Le Mans Master
Joined: May 2006
Posts: 5,814
Likes: 414
From: Pittsburgh suburbs Pa.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
I'm going to call on them,and see......I think that they will work tho'.Isaw these on McMack Corvettes(?????),but he was trying to retire off them.....They were for stock setups wanting to turn out for side exhaust.I will call Hedman tomorrow,and see.Appreciate the input,bud.Anydecent bumper car 4-speed cars over your way????
Melting Slicks
Joined: Jun 2003
Posts: 2,802
Likes: 241
From: Niles, MI
Here are some pics showing the install on my Vette with a small block.
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
See.....what I am going to do is...run the headers to a collector,then rum it straight into a big turn out,and back down the side of the car.This is going to be a street legal road race car,so not wanting to go w/the stock side exhaust.Thank you for the pics,and you answered if these would work on the car.I just need the headers...I have a roundie-round guy here local that is a friend,and owns a muffler shop,and can handle all the fab work for me off the header....Thanks guys!You're the best!
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
These are designed to work with the factory side exhaust mufflers. You will need to run a custom pipe from the header to the muffler. Hedmans note: "Factory side exhaust cut and welding is required."
Here are some pics showing the install on my Vette with a small block.
Here are some pics showing the install on my Vette with a small block.
Melting Slicks
Joined: Dec 2000
Posts: 2,041
Likes: 0
From: Wichita, KS
Le Mans Master
Joined: May 2006
Posts: 5,814
Likes: 414
From: Pittsburgh suburbs Pa.
Thread Starter
Safety Car
Joined: Aug 2006
Posts: 4,102
Likes: 1
From: Forsyth Illinois
I mpulled them from shopheaders.com and the black are only 149.95,and the ceramic coated silver are 433.99.I will go w/the cheaper ones,and have them coated after the fab work is all done.....Not a bad price tho',and is exactly what I am after.Thanks for the Stahl's link,but want to do something that someone just can't go buy,although,I hear alot about Stahl's.
I have a very decent set of chrome hooker sidemounts,and tubes w/inserts for sale,if any of ya all are interested.They are blueing some,but your new ones will be blueing also before you know it,and you are goping to pay ALOT more.The chrome that shows is extremely nice,and they are solid as hell.They are listed in the parts for sale section,if anyone is interested.
Thanks for all the help!!!
I have a very decent set of chrome hooker sidemounts,and tubes w/inserts for sale,if any of ya all are interested.They are blueing some,but your new ones will be blueing also before you know it,and you are goping to pay ALOT more.The chrome that shows is extremely nice,and they are solid as hell.They are listed in the parts for sale section,if anyone is interested.
Thanks for all the help!!!
Team Owner
Joined: Oct 2004
Posts: 23,831
Likes: 10
From: Springfield MO
St. Jude Donor '07
See.....what I am going to do is...run the headers to a collector,then rum it straight into a big turn out,and back down the side of the car.This is going to be a street legal road race car,so not wanting to go w/the stock side exhaust.Thank you for the pics,and you answered if these would work on the car.I just need the headers...I have a roundie-round guy here local that is a friend,and owns a muffler shop,and can handle all the fab work for me off the header....Thanks guys!You're the best!
Team Owner
Joined: Oct 2004
Posts: 23,831
Likes: 10
From: Springfield MO
St. Jude Donor '07
Here's that thread if you haven't seen it yet: http://forums.corvetteforum.com/show...517&forum_id=3
