BB Ignition Wire Loom Ideas
Thread Starter
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,335
From: North of Toronto - Ontario
BB Ignition Wire Loom Ideas
Looking for some different ideas for wire looms. big block, points distributor with stock height valve covers, power brakes, covers have the dip in the cover at the brake booster.
Before I go making something, maybe there's something I'll like already out there.
Did some searching and came up with the usual suspects,
Lets see what you got
Mooser
Before I go making something, maybe there's something I'll like already out there.
Did some searching and came up with the usual suspects,
Lets see what you got
Mooser
Thread Starter
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,335
From: North of Toronto - Ontario
Race Director
Joined: Nov 2002
Posts: 12,142
Likes: 54
From: Taylor Michigan
I prefer to hide the wires rather than have them crawling over the engine like a Octopus......out of sight out of mind and a cleaner look in my subjective opinion.......and with basically stock parts
Melting Slicks
Joined: Jul 2001
Posts: 2,609
Likes: 12
From: Massapequa Park NY
I ended up with these from Billet specialties
http://www.summitracing.com/parts/BSP-69704
http://www.summitracing.com/parts/BSP-69703
http://www.summitracing.com/parts/BSP-69702
Not a very good picture on the car
Jim
http://www.summitracing.com/parts/BSP-69704
http://www.summitracing.com/parts/BSP-69703
http://www.summitracing.com/parts/BSP-69702
Not a very good picture on the car
Jim
Thread Starter
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,335
From: North of Toronto - Ontario
How do they work going around the corner near the brake booster?
I was toying with the idea of making something that went basically straight up beside the bolt sort of like that but if I can buy the same thing, no use re-inventing the wheel
Thanks
Mooser
Melting Slicks
Joined: Jul 2001
Posts: 2,609
Likes: 12
From: Massapequa Park NY
That looks pretty good.
How do they work going around the corner near the brake booster?
I was toying with the idea of making something that went basically straight up beside the bolt sort of like that but if I can buy the same thing, no use re-inventing the wheel
Thanks
Mooser
How do they work going around the corner near the brake booster?
I was toying with the idea of making something that went basically straight up beside the bolt sort of like that but if I can buy the same thing, no use re-inventing the wheel
Thanks
Mooser
They wrap around tight to the valve cover the same way. I can take a picture for you tonight. I have Hydro boost installed so I have a bit more room
Jim
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,335
From: North of Toronto - Ontario
Thanks
That looks like it should work with the booster.
I'll be putting the new covers on shortly and will see what exactly it looks like for room in there but I think I can sneak them around
Appreciate the pics
Mooser
That looks like it should work with the booster.
I'll be putting the new covers on shortly and will see what exactly it looks like for room in there but I think I can sneak them around
Appreciate the pics
Mooser
Melting Slicks
Joined: Jun 2002
Posts: 2,844
Likes: 99
From: Orrtanna Pa.
Last edited by The Money Pit; Apr 27, 2012 at 12:01 PM.
