Help with a unusual barn find
#541
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,515
Received 6,378 Likes
on
3,955 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Thats awesome news. I hope the LT1 will be along as well. Good luck
The following users liked this post:
Pvirg (05-13-2017)
#543
Drifting
#547
Le Mans Master
Not sure how I missed this thread from over a year ago, but just read through the whole thing. Like everyone else, I'm dying to see this car back running and on display, with all details about it sorted out. That being said, it's your car, you need to not listen to us, and take your time and do things at your pace. I also am crossing my fingers that it works out to be able to get the LT-1 to go along with it. Very cool story, and please keep the updates coming.
#548
Racer
Thread Starter
It's go time
Things are gearing up for the General! Need assistance on what size this tire would be today? See photo. Need to replace the tires. Drag 500's are no longer available so Hoosiers or Phoenix?
Thanks for your thoughts
Thanks for your thoughts
The following users liked this post:
Pegan2261 (08-31-2022)
#549
Team Owner
I think that Phoenix is now Firestone's drag tire line. Going with them, might "keep it in the family".
#550
Race Director
7.75" X 25.4mm = 197mm If that's a front tire then 195/15 or 205/15. Is that an drag tire or a regular street car front tire?
A quick search of Goodyear and Phoenix shows a max front width of 5" for their front drag tires.
A quick search of Goodyear and Phoenix shows a max front width of 5" for their front drag tires.
#551
Racer
Thread Starter
Update
Small steps, the front tires are splitting due to age finally found replacements and they came in today. So I had one wheel off and did a little clean and polish. What do you think, not to bad for a 45 year old wheel I think. Zl1 is prepped and ready to pull. Here are a few pics
The following 2 users liked this post by Pvirg:
Metalhead140 (06-28-2017),
Pegan2261 (08-31-2022)
#553
Racer
Thread Starter
Proof why they call a BBC a RAT!
He has been gone a long long time
The following users liked this post:
Pegan2261 (08-31-2022)
#554
Instructor
#556
Racer
Thread Starter
Anyone familiar with the transmission ?
My money says Alan knows all about it! Sorry to put the pressure on you Alan but I believe in you!
#557
Instructor
The following users liked this post:
Andy Tuttle (07-11-2017)
#559
Racer
Thread Starter
Happy Independence Day! Progress update
Motor is out, front tires replaced and wheels shined up. Hopefully the General will be cackling again soon!
The following 2 users liked this post by Pvirg:
Metalhead140 (07-04-2017),
Pegan2261 (08-31-2022)